Contribute
Register

[Success] ASRock Z390 Phantom Gaming-ITX + TB3 + iGPU + Mojave + SFF Build

I updated FW in Win 10 with the attached files
I replaced RP05 with RP21 in my config.list patches

I have attached my EFI folder if it helps... (without serial etc)
(Device Properties are tweaked for my setup)
 

Attachments

  • EFI.zip
    57.1 MB · Views: 150
  • TBT firmware # Z390 Phantom Gaming-ITX-ac.zip
    7.6 MB · Views: 101
baja-king said:
I updated FW in Win 10 with the attached files
I replaced RP05 with RP21 in my config.list patches

I have attached my EFI folder if it helps... (without serial etc)
(Device Properties are tweaked for my setup)
Click to expand...
Thank you very much, I'm just beginning with OpenCore. Many new things for me. :)
 
Thunder
GA-Z77X-UP5-TH |  i7 3770K |  GeForce GTX 680
x58
Rampage III Gene |  i7 920 |  GeForce GTX 580
Mom´s
GA-H87N-WIFI |  i7 4770S |  GeForce GTX 770 (4GB)
baja-king said:
I updated FW in Win 10 with the attached files
I replaced RP05 with RP21 in my config.list patches

I have attached my EFI folder if it helps... (without serial etc)
(Device Properties are tweaked for my setup)
Click to expand...
Thanks @baja-king
However, in the config file you attached, the HEX are still RP05 not RP21. Are they a typo or just irrelevant ?
 
Mac Pro 6,1 macOS High Sierra
GA-H55-UD3H |  i5 750 |  Radeon R9 270x
@Qres apologies that was an older version of the config.plist, I had made changes to the HEX but I'm not sure how important that is.

Updated attached
 

Attachments

  • config.plist
    25.4 KB · Views: 91
baja-king said:
A couple of observations since last night, I left a USB 3 (Type c) SD card reader attached and let my rig sleep last night and this morning it had woken up and said the disk did not eject properly...

@tom-tv the lines in that config.plist are the patches to be applied to the ACPI section of your full Opencore config.plist

@Qres I have too noticed that Hackintool does not reveal the SSP1 usb port but it is functioning correctly

View attachment 467071
Click to expand...

Do you have a Thunderbolt dock that you can test with ? For me (using the flash method) I cannot get the monitor to work through the dock.
 
I'm getting the following:

Code: 
2020-05-04 10:15:26.691682+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.691683+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.691934+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [_INI]
2020-05-04 10:15:26.691934+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [_INI]
2020-05-04 10:15:26.692058+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  Namespace lookup failure, AE_ALREADY_EXISTS
2020-05-04 10:15:26.692058+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  Namespace lookup failure, AE_ALREADY_EXISTS
2020-05-04 10:15:26.693055+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/dswload-462)
2020-05-04 10:15:26.693056+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/dswload-462)
2020-05-04 10:15:26.699798+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.699799+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.700525+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog
2020-05-04 10:15:26.700525+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog
2020-05-04 10:15:26.701065+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/psobject-310)
2020-05-04 10:15:26.701065+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/psobject-310)
2020-05-04 10:15:26.707950+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.707950+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.708677+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:TbtOnPCH) while loading table
2020-05-04 10:15:26.708678+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:TbtOnPCH) while loading table
2020-05-04 10:15:26.709491+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-319)
2020-05-04 10:15:26.709491+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-319)
2020-05-04 10:15:26.716387+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.716387+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.716638+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful
2020-05-04 10:15:26.716638+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful
2020-05-04 10:15:26.717384+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-342)
2020-05-04 10:15:26.717385+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-342)
 
mango1122 said:
Do you have a thunderbolt dock that you can test with ? For me (using the flash method) I cannot get the monitor to work through the dock.
Click to expand...

Sorry no, I only have an Audio DAC
 
Last edited:
baja-king said:
I'm getting the following:

Code: 
2020-05-04 10:15:26.691682+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.691683+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.691934+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [_INI]
2020-05-04 10:15:26.691934+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [_INI]
2020-05-04 10:15:26.692058+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  Namespace lookup failure, AE_ALREADY_EXISTS
2020-05-04 10:15:26.692058+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  Namespace lookup failure, AE_ALREADY_EXISTS
2020-05-04 10:15:26.693055+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/dswload-462)
2020-05-04 10:15:26.693056+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/dswload-462)
2020-05-04 10:15:26.699798+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.699799+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.700525+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog
2020-05-04 10:15:26.700525+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog
2020-05-04 10:15:26.701065+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/psobject-310)
2020-05-04 10:15:26.701065+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/psobject-310)
2020-05-04 10:15:26.707950+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.707950+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_ALREADY_EXISTS,
2020-05-04 10:15:26.708677+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:TbtOnPCH) while loading table
2020-05-04 10:15:26.708678+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:TbtOnPCH) while loading table
2020-05-04 10:15:26.709491+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-319)
2020-05-04 10:15:26.709491+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-319)
2020-05-04 10:15:26.716387+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.716387+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error:
2020-05-04 10:15:26.716638+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful
2020-05-04 10:15:26.716638+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful
2020-05-04 10:15:26.717384+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-342)
2020-05-04 10:15:26.717385+0100  localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf>  (20160930/tbxfload-342)
Click to expand...

Do you see anything under system report / Thunderbolt ?
 
No, just PCI

Untitled.jpg
 
sffjawsh said:
Hmm interesting. Thank you for checking! Will keep this in mind should my needs change. Hot plug is currently more valuable to me than sleep & wake so I'll stick to the native macOS firmware.

Can you do me a favor by sharing your Thunderbolt BIOS settings? Just to see if something in there might affect sleep & wake TB functionality. Grasping at straws here I know but just curious.
Click to expand...
I know this TB chat has moved on quite a bit, but since you asked:
TB Support > Enabled
TB Boot Support > Pre-Boot ACL
TB USB Support > Disabled
Titan Ridge Workaround > Disabled
Security Level > No security
SW SMI on TBT Hot Plug > Enabled
ACPI Notify > Disabled
Win10 TB Support > Disabled
This is on BIOS 4.30 - Clover for dual OS support, and just using a modified "USBPorts-z390-ASRock-PhGmITX-iMac19,1-V8.kext".
I have an Apple TB3 > TB2 adapter connected to a UAD Satellite Octo - can sleep/wake no problem.
Also noticed that its only USB drives that have an issue (ejected) on sleep - all other USB devices seem fine.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top