Contribute
Register

[success] AMD RX 480 8 GB + MSI H110M Gaming + Skylake i5 6500

Joined
Nov 6, 2018
Messages
11
Motherboard
MSI H110M Gaming
CPU
I5-6600K
Graphics
GTX 1070
Please read all instructions before following them! Thank you.
Also, if I loaded the plist from the article you provided it should work with the correct GPU changes right?
 
Joined
Nov 6, 2018
Messages
11
Motherboard
MSI H110M Gaming
CPU
I5-6600K
Graphics
GTX 1070
Im going back to the basics Conath! Removed Graphics card/switched to the applicable motherboard settings (exactly the same as yours). Followed your vid guide for the USB boot stick, even downloaded the same clover version as in the video. Used this guides provided config_sample.plist (assuming its setup for your hardware/same as mine). Same kexts folder... :think:

The interesting thing is my USB won't show in the boot loader when I power it on after BIOS adjustments. Only shows when BIOS is set to Legacy+UEFI... when I tried installing with that setting it gets stuck at the apple logo and doesn't load. Let me know what you think...?

Additional Qs:
DO I need to reset CMOS/NVRAM?
Could the clover boot loader you used in video not be compatible with my version High Sierra (10.13.6)?

Im a noobie, so apologies in advance. Thanks for your help again!
 
Joined
Nov 6, 2018
Messages
11
Motherboard
MSI H110M Gaming
CPU
I5-6600K
Graphics
GTX 1070
According to your profile, you have a Nvidia GTX 1070 graphics card. Nvidia makes their own drivers for use in macOS and publishes them on their website (also known as Nvidia WebDriver). You can find more information in this post. Note that Nvidia has not updated the WebDrivers to work on Mojave as of this time (26 Nov 2018), so you use macOS 10.13 High Sierra for now.

Im going back to the basics Conath! Removed Graphics card/switched to the applicable motherboard settings (exactly the same as yours). Followed your vid guide for the USB boot stick, even downloaded the same clover version as in the video. Used this guides provided config_sample.plist (assuming its setup for your hardware/same as mine). Same kexts folder... :think:

The interesting thing is my USB won't show in the boot loader when I power it on after BIOS adjustments. Only shows when BIOS is set to Legacy+UEFI... when I tried installing with that setting it gets stuck at the apple logo and doesn't load. Let me know what you think...?

Additional Qs:
DO I need to reset CMOS/NVRAM?
Could the clover boot loader you used in video not be compatible with my version High Sierra (10.13.6)?

Im a noobie, so apologies in advance. Thanks for your help again!
 
Joined
Sep 28, 2013
Messages
81
Motherboard
MSI H110M Gaming
CPU
Intel Core i5 6500 @ 3,19 GHz
Graphics
AMD RX 480 8 GB (HIS branded)
Mac
MacBook Pro
Classic Mac
iBook, iMac, PowerBook
Mobile Phone
iOS
Sorry for the lack of replies, Superflood. I somehow stopped receiving email alerts about this thread. Please go ahead and create a new thread concerning your issues. That way other forum members can join in and try to help. Just remember to post a link to the new thread here so I can see it. Thanks.
 
Top