Contribute
Register

Success - AMD Radeon HD7XXX support

Status
Not open for further replies.
Joined
Jun 6, 2014
Messages
52
Motherboard
Asus P8 Z68 V PRO
CPU
i5
Graphics
RX480
Mobile Phone
  1. iOS
It took a bit of searching, but I finally got my Radeon card to work with Mac OS Sierra. After the initial installation, and the computer restarting, it just comes to a black screen. Nothing else is there and I cannot complete the installation. I managed to do so while booting into safe mode. You do this by putting the "-x" boot flag on Clover.
But you cannot install MultiBeast when you boot into safe mode.
After completing the install, I came cross a russian site talking about the HD7770 card I have. It said that once you copy "Verde.kext" file into the Kext folder of Clover (EFI/Clover/Kexts/Other/) you will be able to boot up without any flags needed.

So the next step for me was to use UniBeast again, re-download Sierra and make a another bootable USB. After Unibeast is done, copy the attached kext to the EFI/Clover/Kexts/Other folder of the USB. The installation went through without any issue. After installing the MultiBeast, I copy the kexts over from the USB to the EFI partition of the HardDrive and we're done.

I'm just passing on the information for those struggling with the support for the same card. The kext works for El-Capitan and Sierra (tested)
 

Attachments

  • Verde.kext.zip
    2.4 KB · Views: 692
Last edited:
is it working with r 9 380? I tried with result of black screen. the oly is to completely boot with inte IGX then shift to hdmi of

ATI


my result in benchmark

Result Information

iMac14,2

API Score

77605

Result Information

Upload Date

October 01 2016 07:29 PM

Views

1

System Information



iMac14,2

Compute API

OpenCL

Compute Device

AMD Radeon HD Tonga PRO Prototype Compute Engine

Operating System

macOS 10.12 (Build 16A323)
z170 hd3p
i5 6600 k
16 gb ddr4
 
here are alot of picture
 

Attachments

  • Screen Shot 2016-10-01 at 10.13.52 PM.png
    Screen Shot 2016-10-01 at 10.13.52 PM.png
    394.7 KB · Views: 714
  • Screen Shot 2016-10-01 at 10.15.17 PM.png
    Screen Shot 2016-10-01 at 10.15.17 PM.png
    278.5 KB · Views: 595
  • Screen Shot 2016-10-01 at 10.15.51 PM.png
    Screen Shot 2016-10-01 at 10.15.51 PM.png
    276.2 KB · Views: 572
I believe all that kext does is allow multiple IOPCIMatches for the Cape Verde (77XX) series, altering the AMDRadeonX4000 kext. Some of the cards aren't supported tho I remember reading this in a Radeon thread posting.

Thanks for sharing, I have a 77XX card on my Desktop in which I will be installing Sierra on very soon. This may come in handy if I can't boot without the screen being black.
 
Status
Not open for further replies.
Back
Top