Contribute
Register

[Success] 11.0 Big Sur Public Beta Installation

Status
Not open for further replies.
it appears that

try different port usb and put this to E/O/A, don't forget to add to config.plist too
reset nvram first
 

Attachments

  • SSDT-EC-USBX-LAPTOP.aml
    335 bytes · Views: 137
Hi. After several attempts I managed to install. But several things do not work with third party EFI folder. Wifi Broadcom BCM43xx 1.0 not working. VooDooPS2Controler not working, hd 620 spoff patch not working, no screen brightness, VoodooHD not working.
All this I have been able to install with Raffay's folder.
I have to see how to make OpenCore work, as it worked for me in clover for Catalina 10.15.6
I don't know how to make it work, I wanted to patch for hd 620 spoof but it didn't work.
If you can help me, I appreciate it.
 
Hi. After several attempts I managed to install. But several things do not work with third party EFI folder. Wifi Broadcom BCM43xx 1.0 not working. VooDooPS2Controler not working, hd 620 spoff patch not working, no screen brightness, VoodooHD not working.
All this I have been able to install with Raffay's folder.
I have to see how to make OpenCore work, as it worked for me in clover for Catalina 10.15.6
I don't know how to make it work, I wanted to patch for hd 620 spoof but it didn't work.
If you can help me, I appreciate it.

Did you mean Trackpad gestures like this?

1. What wifi card are you using?
2. For Voodoo try to use acidanthera version
3. Use Hackintool to figure out your Display IDs
4. I can managed audio with "alcid=13" boot arg with id attached below

Screen Shot 2020-08-12 at 05.27.09.png
 

Attachments

  • Screen Shot 2020-08-12 at 05.44.13.png
    Screen Shot 2020-08-12 at 05.44.13.png
    93 KB · Views: 118
  • Screen Shot 2020-08-12 at 05.46.15.png
    Screen Shot 2020-08-12 at 05.46.15.png
    105.3 KB · Views: 113
Hi. I have been able to work the battery and the wifi and the keyboard. The trackpad does not work for me and the graphic screen HD 620 4MB. How do I configure HD 620 2048MB?
 
Hi. I have been able to work the battery and the wifi and the keyboard. The trackpad does not work for me and the graphic screen HD 620 4MB. How do I configure HD 620 2048MB?
what did you do to get wifi/bt working?
 
Hi. I have been able to work the battery and the wifi and the keyboard. The trackpad does not work for me and the graphic screen HD 620 4MB. How do I configure HD 620 2048MB?

Has the graphics acceleration works before, for Catalina or Mojave?
 
Has the graphics acceleration works before, for Catalina or Mojave?
Yes, it worked perfectly on Mojave and Catalina, but using Clover. For OpenCore it doesn't work for me.
This is the config.plist that I used with clover and it all worked 100%.

<key>PciRoot(0)/Pci(0x02,0)</key>
<dict>
<key>## @2 HDMI</key>
<string></string>
<key>#1 0306-&gt;0105</key>
<string>0x591b0000, 0105 instead of 0306, HDMI</string>
<key>#framebuffer-con1-flags</key>
<data>hwEAAA==</data>
<key>AAPL,ig-platform-id</key>
<data>AAAWGQ==</data>
<key>## @0 LVDS-&gt;DP</key>
<string></string>
<key># DVMT-prealloc</key>
<string>32MB BIOS, 19MB framebuffer, 9MB cursor bytes (credit RehabMan)</string>
<key>#framebuffer-con3-pipe</key>
<data>EgAAAA==</data>
<key>## @3 HDMI</key>
<string></string>
<key>#framebuffer-con1-type</key>
<data>AAgAAA==</data>
<key>#1 framebuffer-con1-enable</key>
<integer>1</integer>
<key>#3 framebuffer-con1-alldata</key>
<data>/wAAAAEAAAAgAAAA/wAAAAEAAAAgAAAA/wAAAAEAAAAgAAAA</data>
<key>framebuffer-stolenmem</key>
<data>AAAwAQ==</data>
<key>#AAPL00,override-no-connect</key>
<data></data>
<key>#framebuffer-con3-flags</key>
<data>hwEAAA==</data>
<key>#2 0204-&gt;0105</key>
<string>0x591b0000, 0105 instead of 0204, HDMI</string>
<key>#3 no external</key>
<string>0x591b0000, eliminate all external ports (0204 and 0306)</string>
<key>#framebuffer-con2-pipe</key>
<data>EgAAAA==</data>
<key>#hda-gfx</key>
<string>onboard-1</string>
<key>#2 framebuffer-con1-enable</key>
<integer>1</integer>
<key>#framebuffer-con3-type</key>
<data>AAgAAA==</data>
<key>#1 framebuffer-con1-alldata</key>
<data>AQUKAAAIAACHAQAAAgQKAAAIAACHAQAA/wAAAAEAAAAgAAAA</data>
<key>#framebuffer-con1-enable</key>
<integer>1</integer>
<key>#framebuffer-con0-enable</key>
<integer>1</integer>
<key>framebuffer-unifiedmem</key>
<data>AACZmQ==</data>
<key>## @1 HDMI</key>
<string></string>
<key>#framebuffer-con2-flags</key>
<data>hwEAAA==</data>
<key>#AAPL00,override-no-edid</key>
<data></data>
<key>#framebuffer-con2-enable</key>
<integer>1</integer>
<key>#framebuffer-con0-type</key>
<data>AAQAAA==</data>
<key>#3 framebuffer-con1-enable</key>
<integer>1</integer>
<key>framebuffer-fbmem</key>
<data>AACQAA==</data>
<key>framebuffer-patch-enable</key>
<integer>1</integer>
<key>#framebuffer-con3-enable</key>
<integer>1</integer>
<key>device-id</key>
<data>FhkAAA==</data>
<key>#framebuffer-con1-pipe</key>
<data>EgAAAA==</data>
<key>#framebuffer-con2-type</key>
<data>AAgAAA==</data>
<key>#2 framebuffer-con1-alldata</key>
<data>AQUKAAAIAACHAQAAAwYKAAAEAACHAQAA/wAAAAEAAAAgAAAA</data>
</dict>


I don't know where to put the Open Core the following:

<key>Devices</key>
<dict>
<key>FakeID</key>
<dict>
<key>#IntelGFX</key>
<string>0x59168086</string>
<key>#Kaby Lake-Comment</key>
<string>To avoid automatic Clover fake device-id (Skylake) injection</string>
</dict>
 
Yes, it worked perfectly on Mojave and Catalina, but using Clover. For OpenCore it doesn't work for me.
This is the config.plist that I used with clover and it all worked 100%.

What about generate patch with Hackintool, Have you try it?
 
Status
Not open for further replies.
Back
Top