<< Solved >> SUCCESS - Aorus Z390 Ultra Rev 1.0 / i5-9600K /NVMe Samsung 970 Pro (NO GPU NVIDIA WORKING 10.14.xx)

[reycko]

hello everybody,

For Start Sorry for my English, I am still learning.


I just bought a new computer configuration. and I block the reboot of the Mojave installation.
indeed the USBkey of install done with Unibeast boot well ( uefi clover ), but after the selection of the SSD and the Reboot, installation Freeze.

Here is my configuration:

motherboard :

- Gygabite Z390 AORUS Ultra Rev 1.0
https://www.gigabyte.com/Motherboard/Z390-AORUS-ULTRA-rev-10#kf

- Samsung SSD Nvme 970 Pro 512 Gigo
https://www.amazon.fr/dp/B07CJ3RVP3/?tag=tonymacx8607-21

- Intel I5 9600K
https://www.amazon.fr/dp/B07HHLX1R8/?tag=tonymacx8607-21


- RAM 2X8 GO DDR4 3000 MHZ

- Nvidia GTX 680


that's why I'm asking for your help, please help me I'm lost.

Sorry once again for my bad English

 

[P1LGRIM]

Please read and comply with the rules, in particular the one regarding profiles.
Link to profile

 

[reycko]

ok sur !
Sorry I start in english. if I have trouble, could you help me in PV?

Ok i read and applied the changes to my profile it is good? Thanks for your help (in the signature build I can not find GTX 680 so I put 750 how to do? thank you)

 

[reycko]

Hi ,

will this be a problem with the 680 graphics card?
I'm going to prepare the Zip with EFI of USBkey and Verbose screens

 

[reycko]

Re , so the screen with Verbose launch :

 

[CaseySJ]

I would suggest the following:

• Remove GTX 680 and perform full installation using only the iGPU from the i5-9600K.
• Connect HDMI cable from motherboard to your monitor.
• Download Lilu and WhateverGreen, and copy both kext files to CLOVER/kexts/Other in the EFI partition of your USB install disk.
• Then follow most of the build procedure described here: https://www.tonymacx86.com/threads/...390-thunderbolt-3-i7-9700k-amd-rx-580.267551/
  • But do not use any of the custom SSDTs mentioned in this link.
• To fully activate the HDMI port on your motherboard, it will be necessary to modify config.plist from the EFI partition on your USB install disk. If you can upload that file here, I'll make the change for you.

 

[reycko]

hello sorry for long time.
this is my EFI.zip
I don t understand why install freeze after choose " boot mojave on macOS "

 

[reycko]

I add photo with verbose boot on « boot macOS install on macOS » on clover

 

[CaseySJ]

I add photo with verbose boot on « boot macOS install on macOS » on clover

Please try the attached CLOVER folder:

• Insert USB install disk in your Mac and mount EFI partition.
• In Finder, open the EFI disk.
• Here you will see EFI folder and CLOVER sub-folder.
• Move the CLOVER sub-folder to a different directory (e.g. your Documents folder).
• Then copy that attached CLOVER folder to the same place.
• Eject disk.
• Now try booting the Hackintosh...

 

[reycko]

ok Thks for your Assistance,

I test tonight and make you a return.

what is the problem with my config?

Thks