Contribute
Register

Stuck on Yosemite Post Multibeast Install *Need Help Badly*

Joined
Oct 28, 2014
Messages
3
Motherboard
OSX
CPU
Core i-7 4930k
Graphics
MSI GTX770
Mac
Classic Mac
Mobile Phone
Hey all, so I was able to get into the installer and do all my jazz with the boot flags however after the multibeast install restart I wasn't able to boot normally into yosemite:

-x -v -f npci=0x2000 cpus=1 GraphicsEnabler=No PCIRootUID=0 USBBusFix=Yes

My build

CPU: Intel Core i7-4930K (6 core)
MotherBoard: GA-X79-UP4 BIOS F7
Graphics: MSI GTX 770 (2GB)
Ram: Corsair Vengeance Pro DDR3 1866 (32 Gb)
CPU Cooler: Corsair Hydro Series H100i
HD: SSD 840 EVO 250 Gb
Power: Corsair AX860
Case: NZXT H440 White

BIOS SETTINGS F7

When I ran multibeast I selected the settings:

Quick Start> DSDT Free
Audio > Realtek ALCxxx > ALC892
Disk > 3rd Party SATA (should already be selected
Misc > ElliottForceLegacyRTC
EvOreboot
The two FakeSMC's
NullCPUPowerManagement
USB 3.0 Universal
Network > A
ppleIntelE1000e 3.1

Customize > 1080p Mode
Generate CPU States
Hibernate Mode - Desktop
GraphicsEnabler=Yes ( I think this might've needed to be no)
Kext Dev Mode
Use Kernel Cache



When I restarted after it all installed, it went to the apple logo with a blank bar and never left.

Trying just -v gave me this error (On a side note, my hackintosh seems to be cutting off the whole resolution, it looks larger than my 1080p monitor and cuts 1/2 the bottom dock off and the whole top dock off from being seen):


FugFPJc.jpg

I'm at a loss of what to do, it doesn't boot at all unless i try -F and it boot extremely slowly

When using the same original flags:

-x -v -f npci=0x2000 cpus=1 GraphicsEnabler=No PCIRootUID=0 USBBusFix=Yes

It boots properly into multibeast. This was the build I was using. I forgot to add the 10.9.5 Rollback and switched GraphicsEnabler=No to Yes. Are those things that could cause a problem?

Any help is much appreciated.

I've also turned on hidden folders to find the extra folder but I'm at a loss on where to go to possibly fix some of the multibeast edits. The plist in the extras folder shows none of the options I selected in multibeast. This is what it shows (my multibeast install / plist on ssd):

9lOaYAz.jpg HCms73n.jpg
 
Top