Contribute
Register

Stuck at MACH Reboot, update from 10.12.6

Status
Not open for further replies.
Joined
Oct 11, 2015
Messages
69
Motherboard
ASRock EPC621D8A - 2.10
CPU
Xneo 6278
Graphics
RX 590
My device info:
CPU:Core I7-4710QM 2.5G HZ
Graphics:GTX860 / HD4600(1920x1080)
MotherBoard:Intel HM86
Mobo:Hasee k660d i7 d1


Stuck at "Attempting System Restart... MACH Reboot" when I install High Sierra from 10.12.6 via App Store.

I have tried add MATS or DMAR , but it does not work.
 
My device info:
CPU:Core I7-4710QM 2.5G HZ
Graphics:GTX860 / HD4600(1920x1080)
MotherBoard:Intel HM86
Mobo:Hasee k660d i7 d1


Stuck at "Attempting System Restart... MACH Reboot" when I install High Sierra from 10.12.6 via App Store.

I have tried add MATS or DMAR , but it does not work.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
At first, thx for ur reply.


It works well on 10.12.6 and I have read new issues with High Sierra which u have writen.
(https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/)
I have update some essential kext and some config, it still stuck at Mach reboot(sdst&ssdt.jpeg).

I try to remove the dsdt, it have a new panic on on high sierra update.(remove_dsdt.jpeg)

I have uploaded the preboot panic image and my clover config, there is my dsdt and ssdt in EFI/CLOVER/ACPI/patched/.
 

Attachments

  • dsdt&ssdt.jpeg
    dsdt&ssdt.jpeg
    130.2 KB · Views: 154
  • remove_dsdt.jpeg
    remove_dsdt.jpeg
    126.3 KB · Views: 189
  • EFI.zip
    22.9 MB · Views: 81
At first, thx for ur reply.



It works well on 10.12.6 and I have read new issues with High Sierra which u have writen.
(https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/)
I have update some essential kext and some config, it still stuck at Mach reboot(sdst&ssdt.jpeg).

I try to remove the dsdt, it have a new panic on on high sierra update.(remove_dsdt.jpeg)

I have uploaded the preboot panic image and my clover config, there is my dsdt and ssdt in EFI/CLOVER/ACPI/patched/.
Look at https://www.tonymacx86.com/threads/solved-ich10r-and-high-sierra.233435/page-2#post-1608408
the ich10r patch did it for me.
 
At first, thx for ur reply.



It works well on 10.12.6 and I have read new issues with High Sierra which u have writen.
(https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/)
I have update some essential kext and some config, it still stuck at Mach reboot(sdst&ssdt.jpeg).

I try to remove the dsdt, it have a new panic on on high sierra update.(remove_dsdt.jpeg)

I have uploaded the preboot panic image and my clover config, there is my dsdt and ssdt in EFI/CLOVER/ACPI/patched/.

"Problem Reporting" files are incomplete/wrong (EFI not requested, attach only EFI/Clover as per FAQ)
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
"Problem Reporting" files are incomplete/wrong (EFI not requested, attach only EFI/Clover as per FAQ)
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

I have done according to what the u demand.

Code:
[zhuxi@bogon RehabMan]$kextstat|grep -y acpiplat
   13    2 0xffffff7f82b18000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) 65E05472-6AE7-3308-8CC8-FA6CB0DB2AEE <12 11 7 6 5 4 3 1>
[zhuxi@bogon RehabMan]$kextstat|grep -y appleintelcpu
[zhuxi@bogon RehabMan]$kextstat|grep -y applelpc
   90    0 0xffffff7f82618000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <83 12 5 4 3>
[zhuxi@bogon RehabMan]$kextstat|grep -y applehda
   98    1 0xffffff7f81f08000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (279.48) ED51F180-19C8-3DE1-AF81-0E389D98ADDE <97 96 86 12 7 6 5 4 3 1>
  120    0 0xffffff7f8208a000 0xb5000    0xb5000    com.apple.driver.AppleHDA (999.1.1fc1) 806B8C17-50CA-3C6B-90B3-195F38D8FB89 <119 102 98 97 96 86 6 5 4 3 1>
[zhuxi@bogon RehabMan]$ls -l /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*
ls: /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*: No such file or directory
[zhuxi@bogon RehabMan]$pmset -g assertions
2018-01-04 09:51:04 +0800
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 119(hidd): [0x000000240009804f] 00:11:33 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968147.17"
    Timeout will fire in 596 secs Action=TimeoutActionRelease
Kernel Assertions: 0x4=USB
   id=500  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1a100000 owner=IOUSBHostDevice
   id=501  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d100000 owner=IOUSBHostDevice
   id=504  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d120000 owner=TaiDuGamerMouse
   id=505  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d140000 owner=USB HD Webcam
Idle sleep preventers: IODisplayWrangler
[zhuxi@bogon RehabMan]$pmset -g
System-wide power settings:
Currently in use:
standby              1
womp                 1
halfdim              1
hibernatefile        /var/vm/sleepimage
powernap             1
gpuswitch            2
networkoversleep     0
disksleep            10
sleep                1
autopoweroffdelay    28800
hibernatemode        3
autopoweroff         1
ttyskeepawake        1
displaysleep         10
standbydelay         10800
[zhuxi@bogon RehabMan]$system_profiler SPSerialATADataType|grep TRIM
          TRIM Support: No
[zhuxi@bogon RehabMan]$sudo touch /System/Library/Extensions && sudo kextcache -u /

Password:

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileUSBSwch.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileUSBLANMerge.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileMTP.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileMS.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext DummyHDA.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext

KernelCache ID: 6CB24F7B2D957BCA8A450269D9646C39
 

Attachments

  • attachments.zip
    4.7 MB · Views: 90
I have done according to what the u demand.

Code:
[zhuxi@bogon RehabMan]$kextstat|grep -y acpiplat
   13    2 0xffffff7f82b18000 0x60000    0x60000    com.apple.driver.AppleACPIPlatform (5.0) 65E05472-6AE7-3308-8CC8-FA6CB0DB2AEE <12 11 7 6 5 4 3 1>
[zhuxi@bogon RehabMan]$kextstat|grep -y appleintelcpu
[zhuxi@bogon RehabMan]$kextstat|grep -y applelpc
   90    0 0xffffff7f82618000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) F51595F0-F9B1-3B85-A1C3-F984DAD4107E <83 12 5 4 3>
[zhuxi@bogon RehabMan]$kextstat|grep -y applehda
   98    1 0xffffff7f81f08000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (279.48) ED51F180-19C8-3DE1-AF81-0E389D98ADDE <97 96 86 12 7 6 5 4 3 1>
  120    0 0xffffff7f8208a000 0xb5000    0xb5000    com.apple.driver.AppleHDA (999.1.1fc1) 806B8C17-50CA-3C6B-90B3-195F38D8FB89 <119 102 98 97 96 86 6 5 4 3 1>
[zhuxi@bogon RehabMan]$ls -l /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*
ls: /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*: No such file or directory
[zhuxi@bogon RehabMan]$pmset -g assertions
2018-01-04 09:51:04 +0800
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 119(hidd): [0x000000240009804f] 00:11:33 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968147.17"
    Timeout will fire in 596 secs Action=TimeoutActionRelease
Kernel Assertions: 0x4=USB
   id=500  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1a100000 owner=IOUSBHostDevice
   id=501  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d100000 owner=IOUSBHostDevice
   id=504  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d120000 owner=TaiDuGamerMouse
   id=505  level=255 0x4=USB mod= description=com.apple.usb.externaldevice.1d140000 owner=USB HD Webcam
Idle sleep preventers: IODisplayWrangler
[zhuxi@bogon RehabMan]$pmset -g
System-wide power settings:
Currently in use:
standby              1
womp                 1
halfdim              1
hibernatefile        /var/vm/sleepimage
powernap             1
gpuswitch            2
networkoversleep     0
disksleep            10
sleep                1
autopoweroffdelay    28800
hibernatemode        3
autopoweroff         1
ttyskeepawake        1
displaysleep         10
standbydelay         10800
[zhuxi@bogon RehabMan]$system_profiler SPSerialATADataType|grep TRIM
          TRIM Support: No
[zhuxi@bogon RehabMan]$sudo touch /System/Library/Extensions && sudo kextcache -u /

Password:

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileUSBSwch.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileUSBLANMerge.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileMTP.kext/ is in hash exception list, allowing to load

kext file:///System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns/MotMobileMS.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext DummyHDA.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext

KernelCache ID: 6CB24F7B2D957BCA8A450269D9646C39

If you're trying to boot the installer, try with USB prepared according to the guide (your setup is a bit of a mess, and you should probably start over anyway).

https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
If you're trying to boot the installer, try with USB prepared according to the guide (your setup is a bit of a mess, and you should probably start over anyway).

https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Thanks for your advice and your reply.

I try to start over and there are some new stuck issues.
I make a usb install..

Sometimes it stuck at "+++++" if I do not block Lilu.kext and IntelGraphicsFixup.kext. Otherwise it stuck at com.apple.xpc.launchd[1] (com.apple.WindowServer) <Notice>:Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

It have some ACPI error during the boot.

I upload the new EFI/CLOVER, new ssdt & dsdt in EFI/CLOVER/ACPI/patched/.

E... forgive my poor English.
 

Attachments

  • attachments.zip
    4.3 MB · Views: 80
  • stuck_+++.jpeg
    stuck_+++.jpeg
    1.6 MB · Views: 128
  • stuck001.jpeg
    stuck001.jpeg
    3.4 MB · Views: 96
  • stuck002.jpeg
    stuck002.jpeg
    1.7 MB · Views: 94
Thanks for your advice and your reply.

I try to start over and there are some new stuck issues.
I make a usb install..

Sometimes it stuck at "+++++" if I do not block Lilu.kext and IntelGraphicsFixup.kext. Otherwise it stuck at com.apple.xpc.launchd[1] (com.apple.WindowServer) <Notice>:Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

It have some ACPI error during the boot.

I upload the new EFI/CLOVER, new ssdt & dsdt in EFI/CLOVER/ACPI/patched/.

E... forgive my poor English.

No need for patched ACPI for the installer.
For the WindowServer problem, read here:
https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/
 
This post is repeat...See the next one...
 
Status
Not open for further replies.
Back
Top