<< Solved >> Stuck at End randomseed

[ChriswiththeBeard]

Hello, i have tried so much and i still can not get past this error. I have created a vanilla usb with terminal. i have tried to map my ram DIMMS but stil no luck. i hope someone can help me. I try to install 10.14.5 Mojave on a Intel i7 3770 HP Z220 CMT Workstation with just intel HD4000 graphics

 

[P1LGRIM]

i hope someone can help me

You are probably using the wrong memory fix driver.
Why do you have a PS/2 kext ? Are you using PS/2 peripherals ?

You should remove all of those unnecessary/incorrect ACPI fixes in your config.plist.
You may need to add npci=0x3000 to your boot arguments.

 

[ChriswiththeBeard]

You are probably using the wrong memory fix driver.
Why do you have a PS/2 kext ? Are you using PS/2 peripherals ?

You should remove all of those unnecessary/incorrect ACPI fixes in your config.plist.
You may need to add npci=0x3000 to your boot arguments.

Thanks for the tips, i will give it a try.
i will let you know

 

[cmn699]

Hello, i have tried so much and i still can not get past this error. I have created a vanilla usb with terminal. i have tried to map my ram DIMMS but stil no luck. i hope someone can help me. I try to install 10.14.5 Mojave on a Intel i7 3770 HP Z220 CMT Workstation with just intel HD4000 graphics

Try the edited EFI/CLOVER/drivers64UEFI as annotated.

 

[ChriswiththeBeard]

Try the edited EFI/CLOVER/drivers64UEFI as annotated.

i think i have tried them al, but i wil try again in combination with what P1LGRIM said

 

[ChriswiththeBeard]

Try the edited EFI/CLOVER/drivers64UEFI as annotated.

no combination works, i am about to give up......

 

[cmn699]

i think i have tried them al, but i wil try again in combination with what P1LGRIM said

Is your RAM showing up properly in BIOS?
Had they worked OK in Windows/Linux?
Have you already ruled out Hardware RAM and Memory Socket problems?

 

[ChriswiththeBeard]

Is your RAM showing up properly in BIOS?
Had they worked OK in Windows/Linux?
Have you already ruled out Hardware RAM and Memory Socket problems?

In Windows 10 and Ubuntu all 4 dimms where showing up, for MacOS i only use 2 ddr3 dimms because i also have 2 emc memory dimms and i thought that was the problem

 

[cmn699]

• Try placing the DDR3 DIMMS in RAM Sockets# 1 and 2 ( # 1closest to CPU)and see if they are recognized OK in BIOS and CLOVER would boot without the previously shown "End Randomized. Seed ..." ++++++ Hang/Reboot.

• If it still persists move the Second RAM to the third Slot and try again [See image of MoBo RAM sockets]

• Keep Drivers 64UEFI at the default values originally used.

 

[ChriswiththeBeard]

Still the same error, here is some information on the current settings