Contribute
Register

Stuck at booting high sierra installer (at +++++++++)

Status
Not open for further replies.
Joined
Mar 26, 2013
Messages
14
Motherboard
MSI X99A Raider
CPU
Intel Core i7 6800k
Graphics
Nvidia Geforce GTX 980TI
Mobile Phone
  1. iOS
Hello guys,

i am currently facing a problem and can't get around it somehow.
I followed this tutorial to setup an installer usb stick and stuff like that: https://www.tonymacx86.com/threads/...high-sierra-10-13-on-x99-full-success.227001/

Unfortunatly now the problem is, that i can boot into clover but not inside my usb stick (for installation).
I've uploaded my current EFI folder which i am using: EFI-High Sierra x99.zip
This is the screen where it stops:
18-05-10 18-27-54 0441.jpg

My Bios-Settings:

I am thankful for any help,
ReptoxX
 

Attachments

  • CPUFeaturesv2.jpg
    CPUFeaturesv2.jpg
    235.3 KB · Views: 91
  • IntegratedPerv2.jpg
    IntegratedPerv2.jpg
    211.1 KB · Views: 109
  • PCIv2.jpg
    PCIv2.jpg
    166 KB · Views: 122
  • USBv2.jpg
    USBv2.jpg
    161.3 KB · Views: 95
  • EFI-High Sierra x99.zip
    17.4 MB · Views: 113
Last edited:
Posting because I ran into the exact same problem. I get right there to all the +++++++ and then it reboots. Tried several hours of troubleshooting to no avail.
 
Posting because I ran into the exact same problem. I get right there to all the +++++++ and then it reboots. Tried several hours of troubleshooting to no avail.
If you find something useful i would appreciate if you will update me ;)

It does the exact same on me, if i turn the "don't reboot at panic" off, it will restart
 
If you find something useful i would appreciate if you will update me ;)

It does the exact same on me, if i turn the "don't reboot at panic" off, it will restart
configure your bios properly as per instruction found on installation of high sierra

use flag
-v dart=0 darkwake nv_disable=1 (this did worked for me) on the same issue
 
configure your bios properly as per instruction found on installation of high sierra

use flag
-v dart=0 darkwake nv_disable=1 (this did worked for me) on the same issue
Unfortunatly this doesnt work either. Thanks anyway
I guess i changed things accordingly but i am still not sure whats missing tho.
 

Attachments

  • CPUFeaturesNEW.jpg
    CPUFeaturesNEW.jpg
    231 KB · Views: 83
  • CPUFeaturesNEW_00.jpg
    CPUFeaturesNEW_00.jpg
    200.4 KB · Views: 86
Status
Not open for further replies.
Back
Top