Stuck at 11 minutes install.

[lucenado]

So I made unibeast install goes fine till first reset. Then it says “an error occurred installing macOS. To use Apple diagnostics to check your Mac hardware”. Always at the 11 minute for some reason
Tried different ram. Different disks. Different USB ports.
The solution on another thread was change ram stick. Have 4 16 gb ones. Tried with all of them in pairs. Just one.

 

[lucenado]

 

[cmn699]

So I made unibeast install goes fine till first reset. Then it says “an error occurred installing macOS. To use Apple diagnostics to check your Mac hardware”. Always at the 11 minute for some reason
Tried different ram. Different disks. Different USB ports.
The solution on another thread was change ram stick. Have 4 16 gb ones. Tried with all of them in pairs. Just one.

• Try booting the installer with a recent Mac Model like iMac 18,3(2017) in your Intel 200 type MoBo and other hardware you are using as suggested in an earlier successful installation for the same error #2
  • Force Shut down and reboot from the above error screen
  • in Clover Boot Manager Screen scroll down to Options> SMBOS> and press ENTER on the current Product Name: line
  • Back space and clear the current name and type iMac18,3 [ENTER]
  • Scroll down and Esc to CBM screen
  • Boot your USB installer in Verbose mode (-v) and try reinstallation after formatting the target Hard disk.