Contribute
Register

struck at PCI Configuration Begin

Status
Not open for further replies.
Joined
Oct 20, 2012
Messages
10
Motherboard
Inter desktop board DH77ED
CPU
Inter core i5 3570k @ 3.4 GHz IVY Bridge
Graphics
NvIDIA GTX 640 2 GB/ RAM 8 GB DDR3
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. Android
HI,


i am able to create bootable usb. when i boot it my pc it got struck at


[PCI Configuration Begin(bridge =1 device =1)]
[PCI Configuation changed (bridges =2 devices =12)]


i have tried booting with -v -f GraphicsEnabler=No PCIRootUID=0/1 and npci=0x02000 npci=0x3000
but not use getting same error..


my pc config is :
intel core i5 - 3570k - ivy Bridge/intel desktop board DH77EB / 8 B DDR3 / NVIDIA GTX 640 2GB Graphic Card.


Plz help to resolve this problem...
 
  1. Do you have VT-d in your BIOS? Can you disabled that and see if it helps?
  2. Are you using 10.8.2 to create your Unibeast USB? If so, try 10.8.1.
 
@miramar Thank you for replay..

I have used 10.8 to unibeast. after some attempts I have booted with -v npci=0x3000 somehow i have crossed PCI Configuration Begin error.

Now i am stuct at couldn't alloc class appleHDAcontroller.

Plz help me to overcome this error..

Thanks..
 
What happens if you try "-v -x" ?

When you say "10.8 to Unibeast", do you mean 10.8.0?
 
I have tried with -v -x but no use i am getting same error.

Yes.. i am trying to install 10.8.0

Thanks
 
Suggest you try without the GT640 for now to keep things simple. So remove the card and try with just -v and post a screenshot if it stops. Ensure the Unibeast USB is plugged into a USB2 port. Are there any other things connected to the PC?

Is your LCD connected via DVI?

So remove GT640 and try:
  • "-v"
  • "-v npci=0x3000"
  • "-v npci=0x2000"
  • "-v npci=0x1000"

One more question, do you have a "UEFI Boot" setting in your BIOS?
 
Hi, Thank you..

Now i had installed mountain lion successfully in my pc.

I had used -v -f GraphicsEnabler=No

after installing i am facing below challenges

1) Shutdown is not working. whenever i do shutdown it is restaring insted of shutdown
2) Front Audio jacks are not working. realtek ALC892. after installing drivers from multibeast back jacks are working fine.
3) Unable find drives for my D-Link DWA-110 Wifi

Please help me if you found solutions..

Thanks for your help....
 
Suggest you try without the GT640 for now to keep things simple. So remove the card and try with just -v and post a screenshot if it stops. Ensure the Unibeast USB is plugged into a USB2 port. Are there any other things connected to the PC?

Is your LCD connected via DVI?

So remove GT640 and try:
  • "-v"
  • "-v npci=0x3000"
  • "-v npci=0x2000"
  • "-v npci=0x1000"

One more question, do you have a "UEFI Boot" setting in your BIOS?


I have tried the following:

-v npci=0x3000 PCIRootUID=0 GraphicsEnabler=No (crashed the monitors and left the computer running)

-v npci=0x2000 PCIRootUID=0 GraphicsEnabler=No (Froze)

-v npci=0x3000 PCIRootUID=0 GraphicsEnabler=No (crashed the monitors and left the computer running)


Do I need a different Argument? Do I need quotes?
photo.jpg
System: Quadro 4000 2048 MB Gigabyte GA-X79-UP4 Intel Core i7-3930K Hexa-Core Processor 3.2 Ghz 12 MB Cache



UPDATE: I got this to work and install: -v npci=0x3000 PCIRootUID=0

Everything installed and I restarted with the same thing and landed on a frozen screen...See Attached....
photo 2.jpg
 
Status
Not open for further replies.
Back
Top