Stop sign on boot

[Femin]

So i have the following pc specs:

i7 7700
gtx 1080 asus rog strix
and gigabyte z270m-d3h

so i had a laptop hdd, 60 gb
i installed hackintosh on it worked perfect for me.
so i went and got a new hard disk,
now i removed the laptop hdd, inserted the new one... booted from the same usb,
installation works, first boot works..., installed multibeast (forgot nvidiaWebDrivers)... after restart
cannot boot from hfs, (tried booting from usb also, hfs wont come up)
then i tried to reinstall, now i cannot boot into the usb installer also,
so i made a new usb, still it wont work, it just shows the stop sign when booting without -v
and on opening hfs it does panic 0 caller 0xffffffff... kernel trap at something something...


what should i do to get this fixed ?
(i tried removed Fake Cpu ID from clover during boot, doesnt work...(made it 0x0000) )


(p.s.
in motherboard,
vt-d = disabled
internal graphics : auto
super io config : disabled
xhci handoff : enabled)

 

[Feartech]

So i have the following pc specs:

i7 7700
gtx 1080 asus rog strix
and gigabyte z270m-d3h

so i had a laptop hdd, 60 gb
i installed hackintosh on it worked perfect for me.
so i went and got a new hard disk,
now i removed the laptop hdd, inserted the new one... booted from the same usb,
installation works, first boot works..., installed multibeast (forgot nvidiaWebDrivers)... after restart
cannot boot from hfs, (tried booting from usb also, hfs wont come up)
then i tried to reinstall, now i cannot boot into the usb installer also,
so i made a new usb, still it wont work, it just shows the stop sign when booting without -v
and on opening hfs it does panic 0 caller 0xffffffff... kernel trap at something something...
View attachment 269237

what should i do to get this fixed ?
(i tried removed Fake Cpu ID from clover during boot, doesnt work...(made it 0x0000) )


(p.s.
in motherboard,
vt-d = disabled
internal graphics : auto
super io config : disabled
xhci handoff : enabled)

moved to desktop support

 

[Femin]

can anyone help me out?

 

[P1LGRIM]

can anyone help me out?

The FakeSMC_GPUSensors.kext in FakeSMC Plugins v6.25-332-gf3a8525c.1758 is NOT COMPATIBLE with NVIDIA Pascal Video Cards. If you do not delete it from /Library/Extensions your system will kernel panic on boot.

Boot in safe mode and remove the offending kext.

 

[Femin]

Boot in safe mode and remove the offending kext.

Okay thanks for that information, but now, i formatted my internal hard disk to which i installed sierra in windows to NTFS
but still i cant boot into the installer... it shows the stop sign... now why is that for ?
these are the kexts i have in my clover

should i add something or should i remove something ?

i am also attaching my config.plist please help me out

and i have added SSDT-UIAC.aml in ACPI>patched

please!!

 

[P1LGRIM]

Okay thanks for that information, but now, i formatted my internal hard disk to which i installed sierra in windows to NTFS
but still i cant boot into the installer... it shows the stop sign... now why is that for ?

If you don't boot in verbose mode you will never know.

 

[Femin]

If you don't boot in verbose mode you will never know.

it says waiting for root device or something like that and then text gets garbled with the stop sign on the top of the text.

also as i am installing 10.12.6 it supports kaby lake, so how do i remove the cpu fake id from the plist ?
and what is the solution for the boot error ?

 

[P1LGRIM]

it says waiting for root device or something like that and then text gets garbled with the stop sign on the top of the text.

also as i am installing 10.12.6 it supports kaby lake, so how do i remove the cpu fake id from the plist ?
and what is the solution for the boot error ?

"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.

 

[Femin]

"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.

EVERYTHING used to work as it is... now i dont know why it has stopped working !!
it used to work in USB3 as well as USB2.. but now it doesnt work in any..
now i have created the drive using unibeast - UEFI so if i select Legacy in the BIOS will it work ?

 

[Femin]

"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.

HEY THANKS !! USB2 Hub Worked for me!
thanks a lot dude! now just one last thing.. i m on a kaby lake so do i have to put a fake cpu id for 10.12.6 in the plist or no ?
if yes then what and how and if no then how to remove or comment out the fake id ? thanks in advanced

P.S. You are a life saver