- Joined
- May 3, 2012
- Messages
- 151
- Motherboard
- Gigabyte X79-UD3
- CPU
- i7 X9730k
- Graphics
- Nvidia GeForce GTX670 OC
- Mac
- Classic Mac
- Mobile Phone
The CPU temps were out of control so I replaced the motherboard. CPU temps are normal and stable but the system will not boot (it goes to the apple screen, startup wheel turns for 3 seconds and then the monitor (plasma TV) goes black (ie time's out).
Everything was kept the same. Made sure bios was f8, AHCI mode, etc. I have tried npci=0x2000 and npci=0x3000, PCIRootUID=0 (and =1), GraphicsEnabler=No, -x, -v, -f and nothing works.
If I don't enter npci=0x3000 then there is no wheel and it automatically goes from apple screen to blank screen (ie times-out). I assumed that everything would just startup with the new mobo since nothing else had changed. Only clue that I have is that verbose hangs at "PCI configuration begin" and then the screen goes black. This is the same thing with my pro hack build (that's right, I had two working now none of the hacks are working...)
gigabyte H61-USB3 (rev 1)
intel i5 2500k
8GB RAM
nvidia GT640
Everything was kept the same. Made sure bios was f8, AHCI mode, etc. I have tried npci=0x2000 and npci=0x3000, PCIRootUID=0 (and =1), GraphicsEnabler=No, -x, -v, -f and nothing works.
If I don't enter npci=0x3000 then there is no wheel and it automatically goes from apple screen to blank screen (ie times-out). I assumed that everything would just startup with the new mobo since nothing else had changed. Only clue that I have is that verbose hangs at "PCI configuration begin" and then the screen goes black. This is the same thing with my pro hack build (that's right, I had two working now none of the hacks are working...)
gigabyte H61-USB3 (rev 1)
intel i5 2500k
8GB RAM
nvidia GT640