Contribute
Register

Solved > Stalls on AppleACPICPU error when trying to boot installer (Spectre x360 late 2017)

Joined
Jun 6, 2020
Messages
4
Motherboard
HP Spectre x360 13t late 2017 (Clover)
CPU
Intel Core i7-8550U (1.8 GHz, up to 4 GHz, 8 MB cache, 4 cores)
Graphics
Intel UHD Graphics 620 (16 GB)
Hi,

I am trying to install Mojave on my HP Spectre x360 (late 2017) laptop. Here's a step-by-step of events prior to the error:

I boot to my Clover USB drive (it's on a 32 GB USB 2.0 flash drive and I plug it into a USB 3.0 port -- I don't have any USB 2.0 ports). Clover loads up fine. I select the Mojave installer boot option (the installer is also located on the flash drive). Then an Apple logo appears and a progress bar below the logo reaches "completion" before hanging on a black screen. When booting that installer in verbose mode, I see that it's hanging on an "ApplACPICPU" error as illustrated by the attached screenshot.

Please let me know if y'all have encountered this before or know of any possible fixes. Thank you so much!
 

Attachments

Feartech

Moderator
Joined
Aug 3, 2013
Messages
17,819
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
iMac
Mobile Phone
iOS
Hi,

I am trying to install Mojave on my HP Spectre x360 (late 2017) laptop. Here's a step-by-step of events prior to the error:

I boot to my Clover USB drive (it's on a 32 GB USB 2.0 flash drive and I plug it into a USB 3.0 port -- I don't have any USB 2.0 ports). Clover loads up fine. I select the Mojave installer boot option (the installer is also located on the flash drive). Then an Apple logo appears and a progress bar below the logo reaches "completion" before hanging on a black screen. When booting that installer in verbose mode, I see that it's hanging on an "ApplACPICPU" error as illustrated by the attached screenshot.

Please let me know if y'all have encountered this before or know of any possible fixes. Thank you so much!
use a later version of clover
 
Top