- Joined
- Sep 27, 2014
- Messages
- 5
- Motherboard
- Gigabyte z97-D3H
- CPU
- Intel i7-4790K
- Graphics
- EVGA Geforce GTX 1060 6GB SSC
My hackintosh build had been working perfectly until yesterday evening when I came home from work. It would turn on but then power off at the mac loading screen. I determined that the main SSD was busted, but I was able to fix it by plugging it into my macbook pro and repairing it in the disk utility. I was also able to get any files from it that wasn’t included in the recent backup. I copied all of the files back onto the hard drive, but now when I try to boot, it first takes me to the “reboot and select proper boot device page” and when I use F12 and select the third one down http://imgur.com/3rQUXQz (For some reason, a lot of boot devices are shown, but only one SSD is plugged in at this point), I can get to the clover screen but no disks are shown there.http://imgur.com/9ujdcwy
I feel like it is something I’ve done wrong in the transfer. I always assumed that you would just copy the cloned files back onto a drive and it would act as though nothing has changed. It’s been a while since I’ve delved into hackintosh stuff, as the build has been very stable for a long time, so forgive me if I’m missing something obvious.
Any ideas on what I’m doing wrong and how to boot back up?
System specs: El Capitan
Gigabyte GA Z87X-HD3
Intel i7-4790K
I feel like it is something I’ve done wrong in the transfer. I always assumed that you would just copy the cloned files back onto a drive and it would act as though nothing has changed. It’s been a while since I’ve delved into hackintosh stuff, as the build has been very stable for a long time, so forgive me if I’m missing something obvious.
Any ideas on what I’m doing wrong and how to boot back up?
System specs: El Capitan
Gigabyte GA Z87X-HD3
Intel i7-4790K