Sony Vaio VPCEJ2L1E, help with install

[sjoeze]

Hallo,

I'm trying to install ML with Unibeast on a Sony Vaio VPCEJ2L1E.
Inside the bios there is no option for AHCI or S3 or HPET.
The specs for the laptop are: i3-2330m processor, Atheros 9285 wlan, Realtek gigabit ethernet, geforce 410m GPU.
Should this configuration work?
I already tried an install on the mbr partition (as I don't want to mess with the existing Windows 7 (or reinstall it)).
I used EasyBCD as the bootloader for Windows 7 and OSX).
I could only boot in safe mode (-x).
In normal mode I got the error: ntfs volume name 3.1 in verbose boot.
Has this something to do with the mbr boot or is it a graphics problem (as I read somewhere else).
Any help is appreciated.

 

[jl4c]

Hi,
Your processor, wireless card, HD 3000 are compatibles. You must delete the partition (no windows) and install ML there (GUID partition). After that, fix the problems that could appear, ie: -x flag. After the install, boot with -v flag and take photos, then post them here. That way we could help you.

 

[sjoeze]

I've tried another install with a usb external drive (as I don't want to format the windows 7 disk (not yet)).
Still the same error...
Here is a picture of it in verbose boot:
Foto0000.jpg

Any idea, someone?

 

[sjoeze]

Also,

the audio is a Conexant Smartaudio HD, and I don't have Intel HD 3000 (I think it's disabled by Sony).
The GPU is a Geforce 410m.

 

[sjoeze]

Bump,

No one have a clue?

 

[sjoeze]

Okay,

I'm almost finished with my build.
I succeeded with adding device-id in the videokexts.
After that I got full screen resolution but no qe-ci.
I've installed the retail driver from Nvidia (I needed to set my smbios to MacPro 3,1).
After that: full qe-ci!
The only thing that is not working is my brightness settings.
Could somebody inspect my dsdt.aml (i have pnlf setting inside)?