Some Trouble installing Mavericks :/

[P1LGRIM]

Hi P1lgr1m,

i've tried it with -v -x maxmem=4096 and then i could not read the error (there was some after this could not find /var-thing and ended up on a white screen with a cursor ^^ nothing else happened

Things you could try are :

Remove the GTX 770 while you complete the installation.

Remove all but one stick of RAM - Then Boot with -v -x maxmem=4096

or -v -x maxmem=4096 PCIRootUID=1

or -v -x maxmem=2048

or -v -x maxmem=2048 PCIRootUID=1


Good Luck

 

[P1LGRIM]

Hey
sorry i was too fast with my reply after 3 minutes started the setup of mavericks ^^

But right know there is a second problem: There are no hard disk drives found although my ssd and hdd were connected to the Pc. I entered this disk utility but no drive is found.

Check your SATA settings in your BIOS - Make sure they are set to AHCI.

Check that you have connected power and data cables to your board and your drives.

Connect to Intel not Marvel connectors.

Good Luck

 

[xplo1t]

Wow P1lgrim,

the setup is running right now
Hopefully i won't have many errors when the installation is finished.

This -x (safe mode) does it create any problems when i use the Hackintosh later?

 

[P1LGRIM]

Wow P1lgrim,

the setup is running right now
Hopefully i won't have many errors when the installation is finished.

This -x (safe mode) does it create any problems when i use the Hackintosh later?

Safe mode is just for the initial installation - Once you have run Multibeast you shouldn't need it anymore.

Good Luck