- Joined
- Jul 19, 2015
- Messages
- 7
- Motherboard
- Fujitsu Siemens D3402-A1
- CPU
- i7-6700
- Graphics
- HD 530
My mainboard is the Fujitsu D3402-A1 I have extracted the DSDT and SSDT with clovers F4 option. (You can find the origin attached)
I was following the rehabman's guide and applied the following patches on the main DSDT:
Rename _DSM to XDSM
Rename GFX0 to IGPU
Fix _PLD Buffer / PackageError
Fix ADBG
Add MCHC
Fix WAK Arg0 v2
Fix Mutex with non zero Sync Level
OS Check Fix (win7)
RTC Fix
USB _PRW 0x6D
Then I have found out that once loading I got a ACPI Error that the port _SB_.PCI0.XHC_.RHUB.HS11 could not be resolved in Scope.
I checked the DSDT and there I found a if clause: If (LEqual (PCHV (), SPTH)) which prevents the HS11 - HS14 and SS07 - SS10 devices to be available. So I edited the SSDT-4-USB_MAP and removed these devices. After this change the ACPI Error was gone.
Side question: what exactly is the if clause for (is there a switch to activate these ports??)
Then I had a further ACPI Error -> in other SSDT there are references to GFX0 -> so that these also can not be loaded. I changes them but in SSDT-6-SaSsdt there is an error which I do not know how to fix: unexpected PARSEOP_NOTIFY in line 210:
I changed it to:
Correct???
Further in line 267 there is the following:
here I deleted both integers. Correct??
The same in line 507.
And at the end in line 4673:
What is the solution here? I deleted all Local0??
Thank you for the help.
I was following the rehabman's guide and applied the following patches on the main DSDT:
Rename _DSM to XDSM
Rename GFX0 to IGPU
Fix _PLD Buffer / PackageError
Fix ADBG
Add MCHC
Fix WAK Arg0 v2
Fix Mutex with non zero Sync Level
OS Check Fix (win7)
RTC Fix
USB _PRW 0x6D
Then I have found out that once loading I got a ACPI Error that the port _SB_.PCI0.XHC_.RHUB.HS11 could not be resolved in Scope.
I checked the DSDT and there I found a if clause: If (LEqual (PCHV (), SPTH)) which prevents the HS11 - HS14 and SS07 - SS10 devices to be available. So I edited the SSDT-4-USB_MAP and removed these devices. After this change the ACPI Error was gone.
Side question: what exactly is the if clause for (is there a switch to activate these ports??)
Then I had a further ACPI Error -> in other SSDT there are references to GFX0 -> so that these also can not be loaded. I changes them but in SSDT-6-SaSsdt there is an error which I do not know how to fix: unexpected PARSEOP_NOTIFY in line 210:
Code:
Method (P0L6, 0, NotSerialized)
{
If (\_SB.ISME (P0WK, \_SB.SHPO (P0WK, One), Notify (\_SB.PCI0.PEG0, 0x02))){}
}
Code:
Method (P0L6, 0, NotSerialized)
{
If (\_SB.ISME (P0WK, \_SB.SHPO (P0WK, One)))
{
Notify (\_SB.PCI0.PEG0, 0x02)
}
}
Further in line 267 there is the following:
Code:
Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
{
Return (GPRW)
0x69
0x04
}
The same in line 507.
And at the end in line 4673:
Code:
Method (SGPI, 4, Serialized)
{
If (LEqual (Arg0, One))
{
If (CondRefOf (\_SB.GGOV))
{
Store (\_SB.GGOV, Arg2)
Local0
}
}
ElseIf (LEqual (Arg0, 0x02))
{
If (CondRefOf (\_SB.PCI0.GEXP.GEPS))
{
Store (\_SB.PCI0.GEXP.GEPS, Arg1)
Arg2
Local0
}
}
If (LEqual (Arg3, Zero))
{
Not (Local0, Local0)
And (Local0, One, Local0)
}
Return (Local0)
}
What is the solution here? I deleted all Local0??
Thank you for the help.
Attachments
Last edited: