Solving NVIDIA Driver Install & Loading Problems

[slim.jim]

Well the thing is rn i have high sierra on apfs sooo im gonna try to reinstall it on hfs cauze apfs is kinda ********

I have no issues with AFPS and a GTX 970 using the Web Drivers or a GT 710 using the default drivers.

 

[cataed]

I have no issues with AFPS and a GTX 970 using the Web Drivers or a GT 710 using the default drivers.

Can i run my gpu with web drivers and how do i install them in nv_disable

It would be nice if i had some orientation on how to do anything or a config.plist

 

[frankiedj86]

I’ve tried to install Nvidia web driver on my hackintosh (ASUS ROG Strix Z270, i7-7700K, ASUS 1080 Ti) by following all the instruction described on the first post, but, every time I reboot my PC, the boot stops on the Apple logo. I am using high sierra.

 

[maxi83]

It is my first hackintosh installation.

I’ve tried to install nvidia web driver on my hackintosh but the PC starts always as "OS X Default Graphics Driver". If I select Nvidia Web Driver into NVIDIA Driver Manager and restart, then the OS X Default Graphics Driver is selected. In the ECC tab, no device found.

I added my EFI/EFI/CLOVER/config.plist

My PC: GA-Z170X-ultra gaming, i7-6700K, GIGABYTE NVIDIA 1060 6GB (Gigabyte GeForce GTX 1060 G1 Gaming 6G (rev. 2.0) GeForce GTX 1060 6GB GDDR5)

Can you help me?

Thanks in advance

 

[slim.jim]

I’ve tried to install nvidia web driver on my hackintosh (asus rog strix 270, i7 7700k, asus 1080ti) by following all the instruction described on the first post but everytime I reboot my pc the boot stops on the apple logo. I use high sierra.

Boot with the flag -v to hopefully see where it stops

 

[slim.jim]

It is my first hackintosh installation.

I’ve tried to install nvidia web driver on my hackintosh but the PC starts always as "OS X Default Graphics Driver". If I select Nvidia Web Driver into NVIDIA Driver Manager and restart, then the OS X Default Graphics Driver is selected. In the ECC tab, no device found.

I added my EFI/EFI/CLOVER/config.plist

My PC: GA-Z170X-ultra gaming, i7-6700K, GIGABYTE NVIDIA 1060 6GB (Gigabyte GeForce GTX 1060 G1 Gaming 6G (rev. 2.0) GeForce GTX 1060 6GB GDDR5)

Can you help me?

Thanks in advance

View attachment 291375

View attachment 291376

See the first post to setup emulated NVRAM.

 

[Smallersen]

Hi,
I have problems with my new EVGA GTX1060 and 2 displays on mixed connection DVI / Display Port. The GPU has 1 DVI and 3 display ports.

Boot runs complete, but ends in black screens. This is not a black screen issue, the system is not running in the end. Perhaps after a while a reboot would occur, I did not wait very long.

What works:
2 displays on Display Ports, but my EIZO display is recognized as NTSC/television - this is the main problem
1 display, DVI or Display Port
Boot with DVI display, plug in second display in Display Port after boot runs fine.

OS X 13.1, latest NVIDIA Drivers 378....20.107

Tried:
Check NvidiaWeb
EmuvariableUEFI
Lilu 1.2.1, NvidiaGraphicsFixup 1.2.1, Clover r4289

I dont know what is easier: Solve boot problem or solve NTSC/television problem. Any suggestions?
Thanks in advance.

 

[`]

I use a Dell S2316H working with HDMI. Then, I bought a Viewsonic VX3209 with both DisplayPort and HDMI.

HDMI working, but DisplayPort does not work.

DisplayPort shows clover but, when I boot into macOS, I get a blackscreen, no signal...

I'm using GTX 750 Ti and 10.13.1

 

[frankiedj86]

Boot with the flag -v to hopefully see where it stops

I try to boot with -v command.
Here attached the image
Thanks in advance!

 

[slim.jim]

I try to boot with -v command.
Here attached the image
Thanks in advance!View attachment 291537

Are you booting with an SSDT?