[SOLVED] Weird screen after Multibeast run on Mavericks

[adeser]

Hi there, Hacks!
Here is my last two weeks trouble... I'm going nuts!!!


My system is based on an ASUS P5B with the latest BIOS, the CPU is Xeon E5450, Video is a GeForce 8400ES 256MB. I installed 10.9 using Unibeast 5.2.0 (GraphicsEnabler=Yes), the second boot from Unibeast on the is working fine, all the components are working and are proper recognized in the system profiler (only audio needs the Voodoo kext). The weird screen appears on the boot after I run Multibeast 6.5.1 and with EasyBeast settings. Even booting from Unibeast I get the same screen (even in safemode -x or -f or any other flag I could think of...)
I know this is an experimental install (the system is running the E5450 CPU). With the original **** CPU, Mavericks worked fine.
The Xeon or the bios mod creates a conflict with the memory, (not working above 667MHz).
The thing that bothers me is WHY the HELL it is working fine booting from the Unibeast, but when I apply the FakeSMC and the Bootloader from Multibeast the video card gets ****ed EVEN booting from Unibeast?
I tried a different video card, same problem...
I even tried installing the FakeSMC.kext from Unibeast witch is v6.8 (Multibeast has 6.9) ... same porno image. I tryed deleting nvda50hal, tesla, Nvda startup and other nvdia kexts using another computer, I got to the 1024x732 resolution system woking, then install the video drivers and got the exact same image.
Now I'm using the system day to day, booting from Unibeast. I installed several kext for audio, wifi... life goes on...
Please help!


Here is the system profile right after installing the OS before running Multibeast:

Hardware Overview:

Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3,00 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache: 12 MB
Memory: 8 GB
Bus Speed: 1,33 GHz
Boot ROM Version: UniBeast.tonymacx86.com
SMC Version (system): 1.30f3
Illumination Version: 1.4a6
Serial Number (system): G88268HA5J4
Hardware UUID: 929DFC51-AAB7-53F3-B78A-47B8CCCB4160

NVIDIA GeForce 8400 GS:

Chipset Model: NVIDIA GeForce 8400 GS
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x06e4
Revision ID: 0x00a1
ROM Revision: sion 62.98.29.00.00
Displays:
DELL E2414H:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 86KNG593573U
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported

Memory Slots:

ECC: Disabled
Upgradeable Memory: Yes

BANK0/DIMM0:

Size: 2 GB
Type: DDR2 SDRAM
Speed: 666 MHz
Status: OK
Manufacturer: Kingmax Semiconductor
Part Number: KLEE88F-B8
Serial Number: -

BANK1/DIMM1:

Size: 2 GB
Type: DDR2 SDRAM
Speed: 666 MHz
Status: OK
Manufacturer: Kingston
Part Number: 9905321-031.A00LF
Serial Number: 6A30E7C0

BANK2/DIMM2:

Size: 2 GB
Type: DDR2 SDRAM
Speed: 666 MHz
Status: OK
Manufacturer: Kingmax Semiconductor
Part Number: KLEE88F-B8
Serial Number: -

BANK3/DIMM3:

Size: 2 GB
Type: DDR2 SDRAM
Speed: 666 MHz
Status: OK
Manufacturer: Kingston
Part Number: 9905321-031.A00LF
Serial Number: 6930EEC0

NVIDIA GeForce 8400 GS:

Name: NVDA,Display-B
Type: Display Controller
Driver Installed: Yes
MSI: Yes
Bus: PCI
Slot: Slot-1
Vendor ID: 0x10de
Device ID: 0x06e4
Subsystem Vendor ID: 0x1043
Subsystem ID: 0x0010
ROM Revision: sion 62.98.29.00.00
Revision ID: 0x00a1
Link Width: x16
Link Speed: 2.5 GT/s

 

[adeser]

[FIXED]

Just added the npci=0x2000 flag at boot.