Contribute
Register

(Solved)USB 3.0 not working

Status
Not open for further replies.
If you re-ran MultiBeast just to install the drivers (start up MultiBeast, go to the driver section, enable whichever driver you want and then hit the Build button - which will install the correct kext file to your OS) then the next step would be to download Clover Configurator, mount the EFI partition then enable the USB checkboxes one at a time. Hopefully you will find a solution.
 
kiiroaka said:
If you re-ran MultiBeast just to install the drivers (start up MultiBeast, go to the driver section, enable whichever driver you want and then hit the Build button - which will install the correct kext file to your OS) then the next step would be to download Clover Configurator, mount the EFI partition then enable the USB checkboxes one at a time. Hopefully you will find a solution.
Click to expand...
i'll try that thanks!
 
Flexac's Build
GA-Z97X-UD3H |  i7 4790K |  GeForce GTX 760
  • I did as mentioned above, installed usb drivers in multibeast
  • then I went into utilities and loaded terminal
  • in terminal type:
  • diskutil list
  • find your EFI partition (in my case it's disk0s1)
  • next type:
  • diskutil mount /dev/disk0s1 (you're suppose to be able to do this with clover but it would not mount for me)
  • go to your EFI partition and navigate to your config plist
  • double click it and it will open clover (must have clover configurator)
  • in clover go to ACPI and select USB (not fix usb)
  • next go to devices and uncheck
    • inject and fix ownership
  • click export in the bottom left and select save or save as.
    • better to make a back up of your plist first and then overwrite the existing with the save function
 
Flexac's Build
GA-Z97X-UD3H |  i7 4790K |  GeForce GTX 760
Hello !

On GA-Z170X-Gaming 5 Sierra Beta 6 works well, but USB 3 works only USB 2
sad.png
while in El Capitan all was well... (with USBinjectAll.kext)

I've tried the flexrac's solution but it doesn't work :(

Is there another solution ?

Thank you
 
Zgonda did you upgrade from El Cap or did you do a clean install from USB?
 
A clean install from USB...
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top