[Solved] Updated Sierra to High Sierra lost ALC892 Sound

[ahallasjr]

I just updated a fully working Sierra to High Sierra and everything appears to be working except sound. I tried to reinstall the ALC892 drivers with Multibeast 9.2.1 and Multibeast quits with a segment fault. Also, I noticed that the Multibeast drive install selection dropdown is empty. By the way my SSD was converted to APFS by the install.

 

[aol]

I don't think MultiBeast has been updated for High Sierra yet.

I don't know if @toleda's ALC patches support ALC892, but that'd be one place to check.

 

[chandrudigi]

Same thing happened installed toleda's audio_cloverALC-130_v0.3.command and selected Audio ID 1. Works like before. All port working including front panel mic and audio jack. Check here https://www.tonymacx86.com/threads/high-sierra-desktop-realtek-applehda-audio.226433/ to download the script.

 

[diep90]

me also.

select internal speaker no sound. lineout has sound but wrong speaker. only rear speaker, not front speaker as I want.

before beta version, it worked well.

tried both applealc and cloveralc

I'm using Realtek 1150

 

[ahallasjr]

Same thing happened installed toleda's audio_cloverALC-130_v0.3.command and selected Audio ID 1. Works like before. All port working including front panel mic and audio jack. Check here https://www.tonymacx86.com/threads/high-sierra-desktop-realtek-applehda-audio.226433/ to download the script.

Thank you. This also worked for me. An update to Multibeast is in order. Thanks again.

 

[hackintosh-stormtrooper]

Same thing happened installed toleda's audio_cloverALC-130_v0.3.command and selected Audio ID 1. Works like before. All port working including front panel mic and audio jack. Check here https://www.tonymacx86.com/threads/high-sierra-desktop-realtek-applehda-audio.226433/ to download the script.

Thanks, that fixed my issue!

 

[cortotto]

Same thing happened installed toleda's audio_cloverALC-130_v0.3.command and selected Audio ID 1. Works like before. All port working including front panel mic and audio jack. Check here https://www.tonymacx86.com/threads/high-sierra-desktop-realtek-applehda-audio.226433/ to download the script.

THANK YOU!

 

[pierrotlefou]

Same thing happened installed toleda's audio_cloverALC-130_v0.3.command and selected Audio ID 1. Works like before. All port working including front panel mic and audio jack. Check here https://www.tonymacx86.com/threads/high-sierra-desktop-realtek-applehda-audio.226433/ to download the script.

Works for me, thanks