Contribute
Register

[solved] update Mojave 10.14.1 fails

Status
Not open for further replies.
Joined
Oct 26, 2018
Messages
16
Motherboard
HP ProBook 450 G5 - Clover
CPU
i5-8250U
Graphics
UHD 620+GTX 930MX, 1920x1080
Mac
  1. MacBook
Mobile Phone
  1. Android
Hello ,
the update fails. I tried three times.
I updated the latest repository as described in "Patch Repository Updates". clover and the config plist!
but it does not work!
I do not know!?
 

Attachments

  • debug_29256.zip
    2.4 MB · Views: 74
Hello ,
the update fails. I tried three times.
I updated the latest repository as described in "Patch Repository Updates". clover and the config plist!
but it does not work!
I do not know!?

No ioreg in your debug zip. Please check your files before upload.
 
Sorry, ioreg fails too!
 

Attachments

  • MacBook Pro de BenBarkes.ioreg
    8.2 MB · Views: 100
Hello ,
the update fails. I tried three times.
I updated the latest repository as described in "Patch Repository Updates". clover and the config plist!
but it does not work!
I do not know!?
Sorry, ioreg fails too!

What is the specific problem with the update?
 
First when the computer restarts, the installation is not completed, it stops at the beginning of the bar. Then clover starts and restarts again and again and finally until arriving at a forbidden signal. I get to reboot on my ssd on 10.14, it says "your computer has restarted because of a problem, here is the report:
Code:
Anonymous UUID:       63E13D5F-B2DC-FF78-9BEB-93DE45275BAB

Fri Nov 16 21:45:49 2018

*** Panic Report ***
panic(cpu 4 caller 0xffffff80140d84dd): Kernel trap at 0xffffff80146067a0, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8014b62901, CR3: 0x000000001ce9e000, CR4: 0x00000000003626e0
RAX: 0x0000000000000000, RBX: 0x00000000000032e6, RCX: 0x0000000000000000, RDX: 0xffffff802b0f2580
RSP: 0xffffff811b49bb10, RBP: 0xffffff811b49bb10, RSI: 0xffffff7f948349ee, RDI: 0xffffff8014b62901
R8:  0xffffff802b2c56e8, R9:  0x000000000000b9dc, R10: 0x0000000000000001, R11: 0x0000000000000000
R12: 0x000000000004c590, R13: 0xffffff811ae0c000, R14: 0xffffff802b31f4f8, R15: 0xffffff7f948349ee
RFL: 0x0000000000010246, RIP: 0xffffff80146067a0, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff8014b62901, Error code: 0x0000000000000000, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff811b49b5e0 : 0xffffff8013faca9d
0xffffff811b49b630 : 0xffffff80140e6893
0xffffff811b49b670 : 0xffffff80140d82ba
0xffffff811b49b6e0 : 0xffffff8013f59ca0
0xffffff811b49b700 : 0xffffff8013fac4b7
0xffffff811b49b820 : 0xffffff8013fac303
0xffffff811b49b890 : 0xffffff80140d84dd
0xffffff811b49ba00 : 0xffffff8013f59ca0
0xffffff811b49ba20 : 0xffffff80146067a0
0xffffff811b49bb10 : 0xffffff8014606307
0xffffff811b49bb50 : 0xffffff8014606b33
0xffffff811b49bbc0 : 0xffffff8014604bd5
0xffffff811b49bc50 : 0xffffff8014605579
0xffffff811b49bcc0 : 0xffffff80145d2be1
0xffffff811b49bda0 : 0xffffff80145d0aac
0xffffff811b49be10 : 0xffffff80145de658
0xffffff811b49be60 : 0xffffff801464dc0b
0xffffff811b49be80 : 0xffffff801462b8e1
0xffffff811b49bf00 : 0xffffff801462b4c7
0xffffff811b49bf50 : 0xffffff801462cf96
0xffffff811b49bfa0 : 0xffffff8013f590ce

BSD process name corresponding to current thread: Unknown
Boot args: kext-dev-mode=1 dart=0 -igfxnohdmi -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 18.2.0: Fri Oct  5 19:41:49 PDT 2018; root:xnu-4903.221.2~2/RELEASE_X86_64
Kernel UUID: 5D53F7E4-472A-369D-97D8-4DD877A4BDFF
Kernel slide:     0x0000000013c00000
Kernel text base: 0xffffff8013e00000
__HIB  text base: 0xffffff8013d00000
System model name: MacBookPro14,1 (Mac-B4831CEBD52A0C4C)

System uptime in nanoseconds: 972668447
last loaded kext at 967635083: com.apple.driver.AppleIntelLpssI2C    3.0.60 (addr 0xffffff7f94aa1000, size 40960)
loaded kexts:
(none)

EOF
Model: MacBookPro14,1, BootROM MBP141.F000.B00, 4 processors, Intel Core i5, 1,8 GHz, 8 GB, SMC 2.43f6
Graphics: Intel UHD Graphics 620, Intel UHD Graphics 620, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2400 MHz, SK Hynix, HMA81GS6MFR8N-UH
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x623), Broadcom BCM43xx 1.0 (7.21.190.32 AirPortDriverBrcm4360-1302)
Bluetooth: Version 6.0.8f6, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 860 EVO M.2 250GB, 250,06 GB
USB Device: USB 3.0 Bus
USB Device: BCM20702A0
USB Device: HP HD Camera
Thunderbolt Bus:
 
First when the computer restarts, the installation is not completed, it stops at the beginning of the bar. Then clover starts and restarts again and again and finally until arriving at a forbidden signal. I get to reboot on my ssd on 10.14, it says "your computer has restarted because of a problem, here is the report:
Code:
Anonymous UUID:       63E13D5F-B2DC-FF78-9BEB-93DE45275BAB

Fri Nov 16 21:45:49 2018

*** Panic Report ***
panic(cpu 4 caller 0xffffff80140d84dd): Kernel trap at 0xffffff80146067a0, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8014b62901, CR3: 0x000000001ce9e000, CR4: 0x00000000003626e0
RAX: 0x0000000000000000, RBX: 0x00000000000032e6, RCX: 0x0000000000000000, RDX: 0xffffff802b0f2580
RSP: 0xffffff811b49bb10, RBP: 0xffffff811b49bb10, RSI: 0xffffff7f948349ee, RDI: 0xffffff8014b62901
R8:  0xffffff802b2c56e8, R9:  0x000000000000b9dc, R10: 0x0000000000000001, R11: 0x0000000000000000
R12: 0x000000000004c590, R13: 0xffffff811ae0c000, R14: 0xffffff802b31f4f8, R15: 0xffffff7f948349ee
RFL: 0x0000000000010246, RIP: 0xffffff80146067a0, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff8014b62901, Error code: 0x0000000000000000, Fault CPU: 0x4, PL: 0, VF: 2

Backtrace (CPU 4), Frame : Return Address
0xffffff811b49b5e0 : 0xffffff8013faca9d
0xffffff811b49b630 : 0xffffff80140e6893
0xffffff811b49b670 : 0xffffff80140d82ba
0xffffff811b49b6e0 : 0xffffff8013f59ca0
0xffffff811b49b700 : 0xffffff8013fac4b7
0xffffff811b49b820 : 0xffffff8013fac303
0xffffff811b49b890 : 0xffffff80140d84dd
0xffffff811b49ba00 : 0xffffff8013f59ca0
0xffffff811b49ba20 : 0xffffff80146067a0
0xffffff811b49bb10 : 0xffffff8014606307
0xffffff811b49bb50 : 0xffffff8014606b33
0xffffff811b49bbc0 : 0xffffff8014604bd5
0xffffff811b49bc50 : 0xffffff8014605579
0xffffff811b49bcc0 : 0xffffff80145d2be1
0xffffff811b49bda0 : 0xffffff80145d0aac
0xffffff811b49be10 : 0xffffff80145de658
0xffffff811b49be60 : 0xffffff801464dc0b
0xffffff811b49be80 : 0xffffff801462b8e1
0xffffff811b49bf00 : 0xffffff801462b4c7
0xffffff811b49bf50 : 0xffffff801462cf96
0xffffff811b49bfa0 : 0xffffff8013f590ce

BSD process name corresponding to current thread: Unknown
Boot args: kext-dev-mode=1 dart=0 -igfxnohdmi -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/Locked%20Files/BaseSystem.dmg

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 18.2.0: Fri Oct  5 19:41:49 PDT 2018; root:xnu-4903.221.2~2/RELEASE_X86_64
Kernel UUID: 5D53F7E4-472A-369D-97D8-4DD877A4BDFF
Kernel slide:     0x0000000013c00000
Kernel text base: 0xffffff8013e00000
__HIB  text base: 0xffffff8013d00000
System model name: MacBookPro14,1 (Mac-B4831CEBD52A0C4C)

System uptime in nanoseconds: 972668447
last loaded kext at 967635083: com.apple.driver.AppleIntelLpssI2C    3.0.60 (addr 0xffffff7f94aa1000, size 40960)
loaded kexts:
(none)

EOF
Model: MacBookPro14,1, BootROM MBP141.F000.B00, 4 processors, Intel Core i5, 1,8 GHz, 8 GB, SMC 2.43f6
Graphics: Intel UHD Graphics 620, Intel UHD Graphics 620, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2400 MHz, SK Hynix, HMA81GS6MFR8N-UH
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x623), Broadcom BCM43xx 1.0 (7.21.190.32 AirPortDriverBrcm4360-1302)
Bluetooth: Version 6.0.8f6, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 860 EVO M.2 250GB, 250,06 GB
USB Device: USB 3.0 Bus
USB Device: BCM20702A0
USB Device: HP HD Camera
Thunderbolt Bus:

Make sure you boot the installer in verbose mode to capture any errors/KP that are happening when booting the installer.

Also, your CLOVER/kexts/Other is not correct... GenericUSBXHCI.kext should not be there.

You might consider booting the installer with USB prepared according to the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
OK, thanks
I just started the installer verbose and delete GenericUSBXHCI.kext.
I did the update and it works :D
update.png
 
Status
Not open for further replies.
Back
Top