Contribute
Register

[solved] Unable to boot installer -- OsxAptioFixDrv Error

Status
Not open for further replies.
Joined
May 23, 2011
Messages
248
Motherboard
Lenovo T440S / Toshiba X205-SLI6 / Toshiba C850 / Dell T110 / Lenovo T410 / MP3,1 / MBP4,1
CPU
i5 4300U / T9300 / i3 3110M / 8x 2.8Ghz Xeon / i5 560m / 8x 3.2Ghz X5482 / T9300
Graphics
HD4400 / 2x 8600M GT / Intel HD4000 / Intel IronLake / HD5770 / 8800GT & GTX650 / 8600M GT
Mac
  1. MacBook Pro
  2. Mac Pro
Classic Mac
  1. eMac
Mobile Phone
  1. iOS
Tried booting to 10.11 installer (on another partition on internal drive) but I'm unable to boot due to error.

Error shown is:
"OsxAptioFixDrv: Error - requested memory exceeds out allocated relocation block"

Here is a photo of the full error message:
bd4d2d7fc3bf9ab4d37d3e8ecaa81c96.4211.jpg


Without resolving this issue I can't get anywhere in the installer process.
I'm using clover rev 3270, booting from EFI ... Yosemite 10.10.5 works perfectly fine on this machine.
This is on the T440s from my signature.
 
Unable to boot installer -- OsxAptioFixDrv Error

Tried booting to 10.11 installer (on another partition on internal drive) but I'm unable to boot due to error.

Error shown is:
"OsxAptioFixDrv: Error - requested memory exceeds out allocated relocation block"

Here is a photo of the full error message:
bd4d2d7fc3bf9ab4d37d3e8ecaa81c96.4211.jpg


Without resolving this issue I can't get anywhere in the installer process.
I'm using clover rev 3270, booting from EFI ... Yosemite 10.10.5 works perfectly fine on this machine.
This is on the T440s from my signature.

Update your Clover to the latest.
 
Unable to boot installer -- OsxAptioFixDrv Error

Update your Clover to the latest.

That is the latest revision.

from the boot log (booting in to Yosemite) you can see this:
0:100 0:100 MemLog inited, TSC freq: 2494225166
0:100 0:000
0:100 0:000 Now is 30.9.2015, 20:40:53 (GMT+2047)
0:100 0:000 Starting Clover rev 3270 on Lenovo EFI
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8BDB1B4F-7502-4C2C-ACF0-FA640E7644C7,0x28,0x64000) @B500B398
0:100 0:000 SelfDirPath = \EFI\BOOT
 
Unable to boot installer -- OsxAptioFixDrv Error

That is the latest revision.

from the boot log (booting in to Yosemite) you can see this:

Make sure you're using OsxAptioFixDrv-64.efi, not OsxAptioFix2Drv-64.efi.

Latest version of Clover is r3277 (as built from sources).
 
Unable to boot installer -- OsxAptioFixDrv Error

Make sure you're using OsxAptioFixDrv-64.efi, not OsxAptioFix2Drv-64.efi.
Code:
eweiman-t440s-osx:~ erikweiman$ md5 /Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi
MD5 (/Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi) = 624d60d4cd64a2bfa6cc3405fd186941
Latest version of Clover is r3277 (as built from sources).
Tried with Rev 3277 as well (would have been nice if sourceforge showed the latest revision...) no change regarding El Capitan (the error message is identical).

0:100 0:100 MemLog inited, TSC freq: 2494230065
0:100 0:000
0:100 0:000 Now is 1.10.2015, 1:10:47 (GMT+2047)
0:100 0:000 Starting Clover rev 3277 on Lenovo EFI
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8BDB1B4F-7502-4C2C-ACF0-FA640E7644C7,0x28,0x64000) @B566A218
0:100 0:000 SelfDirPath = \EFI\BOOT
 
Unable to boot installer -- OsxAptioFixDrv Error

Code:
eweiman-t440s-osx:~ erikweiman$ md5 /Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi
MD5 (/Volumes/EFI/EFI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi) = 624d60d4cd64a2bfa6cc3405fd186941

Tried with Rev 3277 as well (would have been nice if sourceforge showed the latest revision...) no change regarding El Capitan (the error message is identical).

Post EFI/Clover folder.
 

Attachments

  • CLOVER.7z
    2.8 MB · Views: 1,736
Unable to boot installer -- OsxAptioFixDrv Error

Attaching Clover folder from EFI partition.

Is the OsxAptioFixDrv-64.efi from Clover v3277?
 
Unable to boot installer -- OsxAptioFixDrv Error

Hello Rehabman, I'm also having this same issue, Clover folder attached.
 

Attachments

  • CLOVER.zip
    3.5 MB · Views: 999
Unable to boot installer -- OsxAptioFixDrv Error

Hello Rehabman, I'm also having this same issue, Clover folder attached.

You could try increasing the realloc block size in OsxAptioFix.c.

Also, is it your intention to have no kexts injected? kexts/Other is ignored due to empty 10.11 directory.
 
Status
Not open for further replies.
Back
Top