[solved] Thinkpad x240 can't wake

[kevin335200]

When it turn to sleep, no way to wake up expect of power it off.
I don't know what file should I upload, please tell me and I will upload it as soon as possible.
Thanks!

 

[RehabMan]

When it turn to sleep, no way to wake up expect of power it off.
I don't know what file should I upload, please tell me and I will upload it as soon as possible.
Thanks!

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

--

Please provide complete details in your profile/signature
("Personal Details" link from "profile menu" in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[kevin335200]

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

Here it is:

 

[RehabMan]

Here it is:

Your problem is likely caused by USB WiFi.

 

[kevin335200]

Your problem is likely caused by USB WiFi.

Solved. i should in BIOS set
Security Chip —> Disabled (if enable wake after sleep will not work)
which is introduced in the x250 guide.
Still a problem: it takes about 1 minute to sleep, even if i don't open any software. And during this time i cannot touch the trackpad or type a word, if i do it will suddenly wake.

 

[RehabMan]

Solved. i should in BIOS set
Security Chip —> Disabled (if enable wake after sleep will not work)
which is introduced in the x250 guide.
Still a problem: it takes about 1 minute to sleep, even if i don't open any software. And during this time i cannot touch the trackpad or type a word, if i do it will suddenly wake.

Delay to enter sleep is normal. There is always a 25-20 sec delay. And all sleep assertions must clear first.
Marked solved.

 

[xelinux]

Solved. i should in BIOS set
Security Chip —> Disabled (if enable wake after sleep will not work)
which is introduced in the x250 guide.
Still a problem: it takes about 1 minute to sleep, even if i don't open any software. And during this time i cannot touch the trackpad or type a word, if i do it will suddenly wake.

can you make full tutorial for thinpad x240 sierra? (sorry for bad english)