Contribute
Register

[solved] System launch shutdown when loggin with battery

Status
Not open for further replies.
jefazo2k5 said:
YEs ,but no kext on clover/kext/ other.

now InjectKext=Detect
Click to expand...
you should still keep FakeSMC, VoodooPS2Controller and an ethernet kext in Clover/Kexts/other
 
Those controllers i know that are commandatory kext ,but i think that only when you boo install or updater.

But are installed on S/L/E..
Is Not ¨more MAclike¨installing ?
 
jefazo2k5 said:
YEs ,but no kext on clover/kext/ other.

now InjectKext=Detect
Click to expand...

Your ACPI configuration is wrong.
It is not possible to disassemble your patchmatic -extract output with: iasl -da -dl *.aml
It is due to a duplicate symbol somewhere.
Looking at the error, it looks like you have PTID in DSDT.aml and in SSDT-0-PtidDevc.aml.
But there is no SSDT-0-PtidDevc.aml in ACPI/origin, so where did it come from?
These are the static SSDTs you have in ACPI/origin:
SSDT-0.aml
SSDT-1.aml
SSDT-5.aml
But none of them need to be patched, therefore none need to be in ACPI/patched.
And your Clover is too old. You should update, then re-extact (delete all ACPI/origin files first), you will notice you get new names.
Then patch only DSDT.aml.
 
jefazo2k5 said:
Those controllers i know that are commandatory kext ,but i think that only when you boo install or updater.
Click to expand...

And that's why you need them in Clover/kexts ... for the install and recovery boot.
The "essential" kexts end up in both places (EFI + system volume).
 
Thx for the aclarations.
Ok! going to start again with updated clover .to extract dsdt

THe SSDT-0-PtidDevc.aml appeared when i activated the ptid device in bios.

now i have loaded optimized defaults.(and recomendations of the laptop guide) to extract all.

Thanks one more time.
 
jefazo2k5 said:
THe SSDT-0-PtidDevc.aml appeared when i activated the ptid device in bios.
Click to expand...

Any change in BIOS options, BIOS version, or hardware changes requires re-extract/re-patch ACPI.
 
RehabMan said:
Any change in BIOS options, BIOS version, or hardware changes requires re-extract/re-patch ACPI.
Click to expand...
uploaded my origin extracted files.

this is my origin extracted files.

I can boot dropping oem tables.
if load oem tables , gets kernel panic (p-state 18)

SSDT-0-Cpu0Ist.aml has the placeholders error.

If i patch this file,with the patch of your repo,get 0 errors.But when i put on clover/acpi/patched .

same panic (p-state 18).

Recommend me make the pm ssdt with piker alpha script ?
 

Attachments

  • origin.zip
    30.1 KB · Views: 65
jefazo2k5 said:
uploaded my origin extracted files.

this is my origin extracted files.

I can boot dropping oem tables.
if load oem tables , gets kernel panic (p-state 18)

SSDT-0-Cpu0Ist.aml has the placeholders error.

If i patch this file,with the patch of your repo,get 0 errors.But when i put on clover/acpi/patched .

same panic (p-state 18).

Recommend me make the pm ssdt with piker alpha script ?
Click to expand...

Read guide regarding "alternate DropTables":
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top