- Joined
- Jul 9, 2011
- Messages
- 12
- Motherboard
- Asus Z170-p
- CPU
- I5-6600K
- Graphics
- GTX 1050 Ti
- Mac
Hello Guys
My system is
Asus Z170-P Motherboard
i5 6600K Processor
NVIDIA GeForce GTX 1050 Ti 4095 MB
Be-quiet 500W PSU
Crucial 16 GB 2400 MHz DDR4
BIOS:
xHCI Handoff enable
Serial Port disable
SATA AHCI mode
IOAPIC 24-119 Entries (enable y disable) two mode stuck
I can not build a robust and stable system, The system Sierra is already installed but when I restart or shut down, I get the error Still waiting for root device error, but after too many reboot ( from 2 times to 9) start correctly.
Once started recognised correctly SATA 6Gb/s.
I dont know because sometimes yes sometimes no, the system stuck in this error
attached some info:
sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
KernelCache ID: EBCFCD0030473728EA927A143AFDDB81
thank you.
Solution by Rehabman;
Extracting my native/clean DSDT using Clover F4.
and check with diff DSDT file.
My SystemMemory addresses in DSDT are mismatched:
SPEEDY-NUCatched rehabman$ diff ../origin/ ../patched/|grep SystemMemory
< OperationRegion (GNVS, SystemMemory, 0xC74EC000, 0x06D5)
> OperationRegion (GNVS, SystemMemory, 0xC74FE000, 0x06D5)
< OperationRegion (CPSB, SystemMemory, 0xC6CC0F98, 0x10)
> OperationRegion (CPSB, SystemMemory, 0xC6CD2F98, 0x10)
and other mistake in OperationRegion(PNVA,SystemMemory,PNVB,PNVL)
< Name (PNVB, 0xC74F1018)
> Name(PNVB,0xC7503018)
My system after too many month , keep stable the still waiting error no appear again, it seems that the problem was with the memory addresses in my DSDT.
My system is
Asus Z170-P Motherboard
i5 6600K Processor
NVIDIA GeForce GTX 1050 Ti 4095 MB
Be-quiet 500W PSU
Crucial 16 GB 2400 MHz DDR4
BIOS:
xHCI Handoff enable
Serial Port disable
SATA AHCI mode
IOAPIC 24-119 Entries (enable y disable) two mode stuck
I can not build a robust and stable system, The system Sierra is already installed but when I restart or shut down, I get the error Still waiting for root device error, but after too many reboot ( from 2 times to 9) start correctly.
Once started recognised correctly SATA 6Gb/s.
I dont know because sometimes yes sometimes no, the system stuck in this error
attached some info:
sudo touch /System/Library/Extensions && sudo kextcache -u /
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
KernelCache ID: EBCFCD0030473728EA927A143AFDDB81
thank you.
Solution by Rehabman;
Extracting my native/clean DSDT using Clover F4.
and check with diff DSDT file.
My SystemMemory addresses in DSDT are mismatched:
SPEEDY-NUCatched rehabman$ diff ../origin/ ../patched/|grep SystemMemory
< OperationRegion (GNVS, SystemMemory, 0xC74EC000, 0x06D5)
> OperationRegion (GNVS, SystemMemory, 0xC74FE000, 0x06D5)
< OperationRegion (CPSB, SystemMemory, 0xC6CC0F98, 0x10)
> OperationRegion (CPSB, SystemMemory, 0xC6CD2F98, 0x10)
and other mistake in OperationRegion(PNVA,SystemMemory,PNVB,PNVL)
< Name (PNVB, 0xC74F1018)
> Name(PNVB,0xC7503018)
My system after too many month , keep stable the still waiting error no appear again, it seems that the problem was with the memory addresses in my DSDT.
Attachments
Last edited: