[solved] Probook 4540s IntelCapriControoler timeout

[Euro321]

Hi,

I have followed the guide and everything is working fine except on little thing:

I get a 60 seconds timeout on AppleIntelCapriController (or something like this) and this causes a slow boot and the GPU gets detected but no QE acceleration at all. Sometimes if I get lucky on some boots I do get QE but it's random and I still can't figure why. (You can take a look at the attached image)

I have attached the debug files needed in order to take a better look.

Thanks a lot !

EDIT: For the QE acceleration to work I needed to delete the SSDT generated by PikerAlpha's script. I tried with -w 3 and also -c 3 but same results although the CPU is working great and turbo without a problem but I don't get GPU acceleration for some reason. I hope this helps.

50:548 0:000 === [ ACPIPatchedAML ] ====================================
50:548 0:000 Unsorted
50:548 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched: size=1700 ... Success
50:548 0:000 Inserting SSDT-4x40s.aml from EFI\CLOVER\ACPI\patched: size=10052 ... Success
50:548 0:000 Inserting SSDT-FAN-READ.aml from EFI\CLOVER\ACPI\patched: size=712 ... Success
50:550 0:001 Inserting SSDT-IGPU.aml from EFI\CLOVER\ACPI\patched: size=3091 ... Success
50:550 0:000 CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
50:550 0:000 Cleanup XSDT: count=15, length=156
50:550 0:000 corrected XSDT count=14, length=148

SSDT.aml - is generated by PikerAlpha's script. But still..Idk why isn't working. I tought that Clover isn't loading SSDT-4x40s but that isn't the case here. All 4 SSDT's are loaded

 

[Euro321]

Solved by turning off Fastboot (I think).

 

[RehabMan]

Solved by turning off Fastboot (I think).

Marked solved.

Please note that it is clearly stated in the guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/

Also...
"Problem Reporting" files are wrong.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[Euro321]

Marked solved.

Please note that it is clearly stated in the guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/

Also...
"Problem Reporting" files are wrong.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Thanks a lot for the heads-up !

Off-topic question: What temps do you get on your ProBook 4540s on CPU idle and on load ?

 

[RehabMan]

Off-topic question: What temps do you get on your ProBook 4540s on CPU idle and on load ?

Haven't tested in while. I use a fan patch (MOD) that has very low RPM but higher temps at idle (fan at lowest until 58C). Refer to code in SSDT-FANQ.dsl (beta branch).