[SOLVED] Problem Installing Elitebook 8470p Clover UEFI Yosemite

[Ariesheilaon7]

Hello Good People...
I'm From Indonesia...

Yesterday I Bought 2nd hand laptop HP Elitebook 8470p
Core i5 3320m
4 GB RAM DDR3
Intel HD 4000
Hardisk 320 GB

I Just Read the instruction from http://www.tonymacx86.com/threads/guide-to-install-yosemite-on-hp-laptops-with-clover-uefi.143675/

when I bought this laptop it has Broadcom bluetooth and Wifi BCM943228HM4L . I Attached the screenshot too.

the question is, will it work out of the box (BCM943228HM4L) on Hackintosh ? Or I Should Replace It ?
thank you

 

[RehabMan]

Hello Good People...
I'm From Indonesia...

Yesterday I Bought 2nd hand laptop HP Elitebook 8740p
Core i5 3320m
4 GB RAM DDR3
Intel HD 4000
Hardisk 320 GB

I Just Read the instruction from http://www.tonymacx86.com/threads/guide-to-install-yosemite-on-hp-laptops-with-clover-uefi.143675/

when I bought this laptop it has Broadcom bluetooth and Wifi BCM943228HM4L . I Attached the screenshot too.

the question is, will it work out of the box (BCM943228HM4L) on Hackintosh ? Or I Should Replace It ?
thank you

See guide: http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/

 

[Ariesheilaon7]

See guide: http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/

ok rehabman i will read it...

I Just Instal Yosemite On HP 8470p... I Follow intrusction from http://www.tonymacx86.com/threads/guide-to-install-yosemite-on-hp-laptops-with-clover-uefi.143675/

I Read it CAREFULLY. ONE BY ONE.the installation going perfect,PBI CE, and etc. When I Installed PBI CE (Latest Version), my problems appears. My Elitebook stuck at IO Bluetooth xxxxxxx

I Attach a photo use my iPhone. I Hope the Image is clear enough to read it.

Thank You Rehabman
Sorry for my bad english

 

[RehabMan]

ok rehabman i will read it...

I Just Instal Yosemite On HP 8470p... I Follow intrusction from http://www.tonymacx86.com/threads/guide-to-install-yosemite-on-hp-laptops-with-clover-uefi.143675/

I Read it CAREFULLY. ONE BY ONE.the installation going perfect,PBI CE, and etc. When I Installed PBI CE (Latest Version), my problems appears. My Elitebook stuck at IO Bluetooth xxxxxxx

I Attach a photo use my iPhone. I Hope the Image is clear enough to read it.

Thank You Rehabman
Sorry for my bad english

The guide you followed is not maintained, therefore not supported.

Follow the new guide.

Please note that your laptop is likely an 8470p, not 8740p.

 

[Ariesheilaon7]

The guide you followed is not maintained, therefore not supported.

Follow the new guide.

Please note that your laptop is likely an 8470p, not 8740p.

so you want me to reinstall all over again from your link here http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/

ooooh Im Sorry it's Typo. Yes my laptop 8470p not 8740p. it's my fault. I Will Edit my post.

 

[Ariesheilaon7]

Hey Rehabman...

when i choose to boot from USB INSTALLER Yosemite, and I Choose Macintosh HD (PARTITION NAME WHERE I INSTAL OS X) I Can reach Desktop Yosemite... and also Battery status on menubar DISABLE. There is "X" on the battery logo. it's weird.

 

[RehabMan]

Hey Rehabman...

when i choose to boot from USB INSTALLER Yosemite, and I Choose Macintosh HD (PARTITION NAME WHERE I INSTAL OS X) I Can reach Desktop Yosemite... and also Battery status on menubar DISABLE. There is "X" on the battery logo. it's weird.

Not weird. You must follow the instructions in the guide (ACPI, config.plist, etc) and boot from your HDD/SSD.

 

[Ariesheilaon7]

Post Installation

Install Clover UEFI as described in the guide linked by the previous section (post #2). After installing Clover, and configuring it correctly (config.plist, kexts, etc, just as you did for USB) you should be able to boot from the HDD/SSD. The configuration at this point should be exactly the same as USB. Don't forget both HFSPlus.efi and HPFanReset.efi.

But there are still many issues and devices that won't work correctly. For that, we need to patch DSDT, provide a proper config.plist, and install the kexts that are required.

Since you have RealtekRTL8111.kext/IntelMausiEthernet.kext already injected by Clover, you should have internet access simply by using an Ethernet cable to your router. Plug it in and make sure you have internet access before continuing. Or if you're using WiFi, you can connect to your WiFi router before continuing.

Installation of the tools and patching is easy provided the scripts and tools at the ProBook repository: https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch

To start, the developer tools must be installed. Run Terminal, and type:

You will be prompted to install the developer tools. Since you have internet working, you can choose to have it download and install them automatically. Do that before continuing.

After the developer tools are installed, we need to get a couple of projects from my github.

I Got this from your link that you gave to me:
http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/

So to use this tutorial, My Elitebook 8740p should Boot Properly right ? then connected to internet to download all repository to my elite book ?

 

[RehabMan]

I Got this from your link that you gave to me:
http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/

So to use this tutorial, My Elitebook 8740p should Boot Properly right ? then connected to internet to download all repository to my elite book ?

Please fill out your profile as requested in the guide....

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

--

Full post install instructions are in the hotpatch guide already linked. Please read it carefully.

 

[Ariesheilaon7]

Please fill out your profile as requested in the guide....

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

--

Full post install instructions are in the hotpatch guide already linked. Please read it carefully.

hey rehab man I've update my profile..

I found something weird on my elite book 8470p especially the bluetooth... when I uncheck option Embedded bluetooth on bios, my elite book can boot from hdd. but on system preferences, bluetooth icon was missing.

when check Embedded bluetooth on bios, my elite book stuck at [IOBluetooth Missing Transport Failed] something like that.

do I Miss something ?

thank you rehabman.