- Joined
- Jul 27, 2012
- Messages
- 28
- Motherboard
- Gigabyte Z170 Gaming 3-EU
- CPU
- i7-6700
- Graphics
- GTX 1060
- Mobile Phone
you are right I removed that and the InjectIntel but the card is still not workingYou don't need nv_disable=1 flag
you are right I removed that and the InjectIntel but the card is still not workingYou don't need nv_disable=1 flag
I get the display 7mb if I boot in verbose also make sure nvram is working good luckyou are right I removed that and the InjectIntel but the card is still not working
@hagop so you have the asus strix 1070 which works fine for you as planning to order one right away
I get the display 7mb if I boot in verbose also make sure nvram is working good luck
I had exactly the same issue when I switched from Intel HD to GTX 970.
First you have to delete all elements about Intel HD in your config.plist (like "Inject Intel", hexadecimal in kextToPatch, etc...) then you have to DISABLED the Intel HD in your BIOS, then put PCI 1 (your graphic card) as primary.
When I let the Intel HD activate with my 970, the boot was very slow too.