[Solved] My Wifi TL-WDN4800 N900 not working after install Mojave

[rounq]

Hi Guys

after install Mojave wifi not working, TL-WDN4800 N900
i installed Mojave on High Sierra not a fresh install.

my wifi not working and my graphics cards Gigabyte GeForce GTX Graphics Cards GV-N950XTREME-2GD.


any help please

sorry if my English not good

 

[cmn699]

Hi Guys

after install Mojave wifi not working, TL-WDN4800 N900
i installed Mojave on High Sierra not a fresh install.

my wifi not working and my graphics cards Gigabyte GeForce GTX Graphics Cards GV-N950XTREME-2GD.


any help please

sorry if my English not good

Install 1080211Family.kext (uploaded as zipped) to your Mojave System Disk's Library /Extensions , System Library/Extensions folder using any of the following ->Kext Utility|Kext Wizard/KextBeast

 

[robinzon66]

Install 1080211Family.kext (uploaded as zipped) to your Mojave System Disk's Library /Extensions , System Library/Extensions folder using any of the following ->Kext Utility|Kext Wizard/Kext Beast

With -lilubetaall boot argument + Lilu.kext, my Wi-Fi Card (TP-LINK TL-WDN4800) is now working without using old io80211family.kext from High Sierra.

 

[rounq]

With -lilubetaall boot argument + Lilu.kext, my Wi-Fi Card (TP-LINK TL-WDN4800) is now working without using old io80211family.kext from High Sierra.

Not working with me

 

[robinzon66]

Not working with me

You can try this:

Update Clover bootloader.
EFI folder -> config.plist -> RtVariables -> 0x67
Reboot.
Repair permissions (for example with Kext Utility).
Reboot.

Or fresh Mojave install.

Also you can use io80211family.kext from High Sierra.

Because TP-LINK TL-WDN4800 no longer natively supported in Mojave I think better choice is to buy another Wi-Fi Card which I did. Now waiting for delivery.

 

[rounq]

Install 1080211Family.kext (uploaded as zipped) to your Mojave System Disk's Library /Extensions , System Library/Extensions folder using any of the following ->Kext Utility|Kext Wizard/Kext Beast

You can try this:

Update Clover bootloader.
EFI folder -> config.plist -> RtVariables -> 0x67
Reboot.
Repair permissions (for example with Kext Utility).
Reboot.

Or fresh Mojave install.

Also you can use io80211family.kext from High Sierra.

Because TP-LINK TL-WDN4800 no longer natively supported in Mojave I think better choice is to buy another Wi-Fi Card which I did. Now waiting for delivery.

Thank you, worked with me
but still have problem with Audio Realtek 100 series and Nvidia GTX 950

 

[cmn699]

Thank you, worked with me
but still have problem with Audio Realtek 100 series and Nvidia GTX 950

• Upload your current CLOVER from that System disk as a zipped file to check and suggest what if anything can be done.

 

[rounq]

• Upload your current CLOVER from that System disk as a zipped file to check and suggest what if anything can be done.

please find attached

Motherboards GA-Z170X-UD5
GeForce GTX Graphics Cards GV-N950XTREME-2GD
Intel Core i5 6600K 3.50 GHz Quad Core Skylake Desktop Processor, Socket LGA 1151, 6MB Cache
Ballistix Sport LT 16GB Kit (8GBx2) DDR4 2400 MT/s (PC4-19200) DIMM 288-Pin
TP-Link TL-WDN4800 N900 Dual Band PCI-E Wireless WiFi network Adapter Card
Samsung 850 EVO 250GB 2.5-Inch SATA III Internal SSD

 

[hevega]

Works, thank you
Using io80211family.kext from High Sierra, and installed with kext beast in Library /Extensions.
Lilu.kext in clover efi.

 

[agrajag]

You can try this:
Update Clover bootloader.
EFI folder -> config.plist -> RtVariables -> 0x67
Reboot.
Repair permissions (for example with Kext Utility).
Reboot.

I have the same issue--
Which RtVariables entry? BooterConfig or CsrAcrtiveConfig?