[Solved] Multibeast 9.1.0 - Installation Failed Logs Inside - z170 motherboard clean install

[cbarbaree]

Hi Folks,

Install of Sierra 10.12.5. Keep seeing this when attempting to install anything on multibeast:

06/10/17 17:04:06 - Starting MultiBeast 9.1.0-20170501
06/10/17 17:04:37 - Installing 'Bootloaders > Clover v2.4k r4063 UEFI Boot Mode'
06/10/17 17:04:41 - Installing 'BootVolume'
06/10/17 17:04:41 - Mounting EFI
06/10/17 17:04:42 - Installing 'Drivers > Disk > 3rd Party SATA'
06/10/17 17:04:48 - Install of '/private/var/folders/lf/mb3lr4gx6jl69lxpgvbp6qk00000gn/T/AppTranslocation/ECF49B4E-1E2C-4B19-906A-101BE80B1FB7/d/MultiBeast.app/Contents/Resources/AHCI_3rdParty_SATA.pkg' failed.
'installer: Package name is AHCI_3rdParty_SATA
installer: Upgrading at base path /
installer: The upgrade failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.

It is the same for every package I attempt to install. I have removed all extra efi entries in clover as well following the guide posted here on tonymac.

Any help is appreciated!

maximus VIII gene z170
6700k
samsung evo 500 m.2 (sata)
gtx 1050ti
32gb corsair ram
pcie adaptor and samsung 960 evo 500

os is installed on the Samsung evo 500 m.2 in the motherboard m.2 slot.

 

[cmn699]

Hi Folks,

Install of Sierra 10.12.5. Keep seeing this when attempting to install anything on multibeast:

06/10/17 17:04:06 - Starting MultiBeast 9.1.0-20170501
06/10/17 17:04:37 - Installing 'Bootloaders > Clover v2.4k r4063 UEFI Boot Mode'
06/10/17 17:04:41 - Installing 'BootVolume'
06/10/17 17:04:41 - Mounting EFI
06/10/17 17:04:42 - Installing 'Drivers > Disk > 3rd Party SATA'
06/10/17 17:04:48 - Install of '/private/var/folders/lf/mb3lr4gx6jl69lxpgvbp6qk00000gn/T/AppTranslocation/ECF49B4E-1E2C-4B19-906A-101BE80B1FB7/d/MultiBeast.app/Contents/Resources/AHCI_3rdParty_SATA.pkg' failed.
'installer: Package name is AHCI_3rdParty_SATA
installer: Upgrading at base path /
installer: The upgrade failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.

It is the same for every package I attempt to install. I have removed all extra efi entries in clover as well following the guide posted here on tonymac.

Any help is appreciated!

maximus VIII gene z170
6700k
samsung evo 500 m.2 (sata)
gtx 1050ti
32gb corsair ram
pcie adaptor and samsung 960 evo 500

os is installed on the Samsung evo 500 m.2 in the motherboard m.2 slot.

• I assume you are referring to Multibeast 9.1.0.

• If you can upload Multibeast.log to the Forum, someone may be able to say why Multibeast 9.1.0 failed.

• Multibeast Log is usually in ~/Library/Logs/MultiBeast.log
  • Right click Finder icon from Dock >Go To Folder... type ~/Library/Logs/ >Go [See composite image]
    
  • Upload Multibeast.log to the Forum

 

[P1LGRIM]

For MultiBeast problems you should post in the MultiBeast forum.
Read the Failure Reporting notes first.

 

[cbarbaree]

Was a partitioning error on my part (MBR in lieu of the correct format) - thank you both for your help. I will be sure to consult the guidelines prior to posting to ensure that I am in the correct place.