[Solved] Mojave 10.14.1 shutdown problem (h370)

[feliss]

Please help me. Everything works except shutdown. Reboot occurs when when i try to turn off my computer. Here is my specs and config.plist

my specs:
i7-8700k
h370 hd3
Radeon XFX rx580
evo970 500gb

 

[BreBo]

@feliss, please update your profile (personal details) with your Motherboard, CPU and iGPU or Graphics Card(s).

Profiles are mandatory so that others can assist you.

Add EmuVariableUefi-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder

 

[feliss]

Thank you for your reply, I'm very appreciated for your help. I updated my profile as you said, sorry about that. I added EmuVariableUefi-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder but with this file the OS even didn't start, it is showing crossed circle on the screen. Maybe I should do somethimg else?

 

[wooozie69]

You may need a proper SSDT for this issue. Check this out: https://www.tonymacx86.com/threads/quick-guide-to-generate-a-ssdt-for-cpu-power-management.177456/

 

[feliss]

It does work for my processor (

 

[feliss]

What I've already done, changed SMBIOS to 18.3 and to the latest macmini, setting FixShutdown to true, config.plist/ACPI/SSDT/Generate/PluginType=true

nothing helps (

 

[cmn699]

What I've already done, changed SMBIOS to 18.3 and to the latest macmini, setting FixShutdown to true, config.plist/ACPI/SSDT/Generate/PluginType=true

nothing helps (

• Try the following in BIOS if not already done. Then SAVE and REBOOT
• Then try Shut Down to test if successful.

• BIOS_Chipset_ Wake On LAN Default is ENABLED; change that to DISABLED [See Image-1]
• BIOS_Power_ErP default is DISABLED; change that to ENABLED [See image-2]

 

[feliss]

• Try the following in BIOS if not already done. Then SAVE and REBOOT
• Then try Shut Down to test if successful.

• BIOS_Chipset_ Wake On LAN Default is ENABLED; change that to DISABLED [See Image-1]
• BIOS_Power_ErP default is DISABLED; change that to ENABLED [See image-2]

no changes (

I'm already checked dsdt for errors and try to remove all _PRW in dsdt methods but nothing changes.
It's weird but few times PC was shutdown properly.

 

[markmac]

/edit: not relevant

 

[cmn699]

Got the same cpu and a h370 chipset.
What i did:

-Add EmuVariableUefi-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder
And also Aptiofix3drv with clover rc and additional scripts.

-Select Apple RTC and AppleintelCPUPM with clover configurator.

All fine. Good luck!

• OP has already uploaded his config.plist for us to take a look to help.
  • Please check post #1.
  • Did you review that?
• OP has already added EmuVariableUefi-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder as responded at #3 in reply to BreBo's recommendation but had problem booting as indicated at #3