[Solved] macOS Splash Screen Drags After NVIDIA Web Driver

[x888x]

Hello, I have installed the most recent NVIDIA web driver for my macOS and the splash screen drags making do a brand new install of macOS High Sierra, which is becoming a huge plain, plus 14MB of display memory is a bit tough to use.

 

[x888x]

I have posted my CLOVER folder incase needed, as well as I have used NVIDIA Web Driver 378.10.10.10.15.117, and used this guide, but still not luck

 

[x888x]

I've tried off site solutions and still haven't gotten it to work.

 

[P1LGRIM]

I've tried off site solutions and still haven't gotten it to work.

If you are using Nvidia graphics why are you injecting Intel ?

BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Update web drivers to ensure that you have the correct version.
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP completely - CsrActiveConfig 0x2EF
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext , LiluFriend and NvidiaGraphicsFixup.kext

Potential Problems :
HDMI 2.0 is not supported - Use HDMI 1.4 (or lower)
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

 

[x888x]

If you are using Nvidia graphics why are you injecting Intel ?

BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Update web drivers to ensure that you have the correct version.
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP completely - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext , LiluFriend and NvidiaGraphicsFixup.kext

Potential Problems :
HDMI 2.0 is not supported - Use HDMI 1.4 (or lower)
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

Where was I injecting Intel, I thought I had disabled it.

 

[P1LGRIM]

Where was I injecting Intel, I thought I had disabled it.

 

[x888x]

Oh, I thought I had that disabled, I'll try what you told me to do right away! I'll let you know if it works or not.

 

[x888x]

View attachment 285870

I did everything u told me to do and it still gets 2/3 done loading then just restarts my PC.

 

[P1LGRIM]

I did everything u told me to do and it still gets 2/3 done loading then just restarts my PC.

No more ideas.

 

[x888x]

Thanks for trying to help