[solved] Issues booting to installer

[Jgigaroa]

Issues booting to installer I have a Sony Viao E Series model SVE17135CXB notebook, with a Intel Core i7 (3rd Gen) 3632QM and Intel HD 4000 graphics, when I attempt to boot I get an instant kernel panic right after “framework successfully initialized”, I’ve used Enoch and Clover and I’ve used different args, I’ve tried Yosemite and Seirra, I remember after I seen a post I added the achiportinjector, ioahciblockstorageinjector, and genericusbxchi. I was able to get the pc to boot with a boot arg I know I’ve seen it before and it isn’t a new it was something to do with bios or debug x something.

 

[P1LGRIM]

Not a Desktop - Moved to Laptop Support.

 

[RehabMan]

Issues booting to installer I have a Sony Viao notebook, with a Intel Core i7 (3rd Gen) 3632QM and Intel HD 4000 graphics, when I attempt to boot I get an instant kernel panic right after “framework successfully initialized”, I’ve used Enoch and Clover and I’ve used different args, I’ve tried Yosemite and Seirra, I remember after I seen a post I added the achiportinjector, ioahciblockstorageinjector, and genericusbxchi. I was able to get the pc to boot with a boot arg I know I’ve seen it before and it isn’t a new it was something to do with bios or debug x something.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[Jgigaroa]

I used unibeast to make the clover drive using the legacy option, and the I downloaded your preconfigured plist and I renamed the config_hd4000_1600x900 to config.plist and then replaced config file on the efi clover partition and was able to boot right to the seirra installer

 

[RehabMan]

I used unibeast to make the clover drive using the legacy option, and the I downloaded your preconfigured plist and I renamed the config_hd4000_1600x900 to config.plist and then replaced config file on the efi clover partition and was able to boot right to the seirra installer

Marked solved.

But please update your profile with hardware details as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html