[solved] Intel HD4400 High Sierra

[MarcoDS]

Hi, I successfully installed High Sierra 10.13.4 on my Acer Aspire E5 573g, but now I have a huge screen problem. It is flickering! I already read that I have to set the BIOS to legacy but my I can only set UEFI or Legacy and I didn't managed to get clover working in legacy mode . Are there other fixes or ways to install clover in legacy mode? I read the clover laptop guide for the creation of the legacy clover usb but nothing changed.

My laptop has an i3 4005u, HD4400 and discrete NVIDIA GPU that I have already disabled in my config.plist. The backlight is working and HDMI attached display works without any problem.

 

[RehabMan]

Hi, I successfully installed High Sierra 10.13.4 on my Acer Aspire E5 573g, but now I have a huge screen problem. It is flickering! I already read that I have to set the BIOS to legacy but my I can only set UEFI or Legacy and I didn't managed to get clover working in legacy mode . Are there other fixes or ways to install clover in legacy mode? I read the clover laptop guide for the creation of the legacy clover usb but nothing changed.

My laptop has an i3 4005u, HD4400 and discrete NVIDIA GPU that I have already disabled in my config.plist. The backlight is working and HDMI attached display works without any problem.

Not a guide. Moved to laptop support.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[MarcoDS]

Not a guide. Moved to laptop support.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Sorry, I have just uploaded a photo of my problem and the clover directories that I use (for uefi and for legacy), I wasn't able to run the gen_debug.sh now, but I will upload the results later.

 

[RehabMan]

Sorry, I have just uploaded a photo of my problem and the clover directories that I use (for uefi and for legacy), I wasn't able to run the gen_debug.sh now, but I will upload the results later.

No laptop details in your profile.
Please fix as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Your EFI/Clover is not per guide.
Follow as written:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[MarcoDS]

Your EFI/Clover is not per guide.
Follow as written:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Ok I solved changing the pre allocated DVMT to 64MB unlocking the BIOS. Thanks very much for the links and for your time, now I have a fully working hackintosh lapotop, except for the wireless card but I am going to replace it.

 

[RehabMan]

Ok I solved changing the pre allocated DVMT to 64MB unlocking the BIOS. Thanks very much for the links and for your time, now I have a fully working hackintosh lapotop, except for the wireless card but I am going to replace it.

Your profile still has no laptop hardware details.
Please fix as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Note: Marking this thread solved.

 

[by-erry]

Your profile still has no laptop hardware details.
Please fix as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Note: Marking this thread solved.

Please can you right a simply guide to start installation?
Please the same guide is valida also for Mojave?

 

[by-erry]

Hi, I successfully installed High Sierra 10.13.4 on my Acer Aspire E5 573g, but now I have a huge screen problem. It is flickering! I already read that I have to set the BIOS to legacy but my I can only set UEFI or Legacy and I didn't managed to get clover working in legacy mode . Are there other fixes or ways to install clover in legacy mode? I read the clover laptop guide for the creation of the legacy clover usb but nothing changed.

My laptop has an i3 4005u, HD4400 and discrete NVIDIA GPU that I have already disabled in my config.plist. The backlight is working and HDMI attached display works without any problem.

 

[by-erry]

Marco, have you a simply guide to start installation?
Did you use Clover?
Setting config in wich way?
Thanks

 

[Feartech]

Please can you right a simply guide to start installation?
Please the same guide is valida also for Mojave?

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com