- Joined
- Jan 9, 2016
- Messages
- 119
- Motherboard
- Cube mix plus
- CPU
- M3-7y30
- Graphics
- HD 615, 1920 × 1080
Hi all,
I' trying to install High Sierra on my tablet but I cannot get the installer (error in the photo).
I disabled Vt-d, secure boot, fastboot and enabled csm (uefi only).
I tried to follow the guide of rehab but I'am stuck at the photo... I also used a clover folder from another user that has this tablet but I have the same outputs in verbose...
Sometimes the installer restart the tablet but most of the times it is stuck at the photo...
I use the unique micro-usb 3 port with the adapter and an external powered hub... I tried also to set the auto-boot of the installer from the bios and clover so that I have not to connect the keyboard to see if it boot and I have the same problem... So it is not the hub to cause it... I tried with 2 different Usb2 sticks and with an Usb3 stick... I tried also both OsxAptioFixDrv-64.efi+EmuVariableUefi.efi and AptioMemoryFix.efi... Tried also to faken the ig-platform-id with no luck...
In here there are the two zips and the photo on verbose... The zip built by me from the guide is Clover.zip, the zip of the other user is Clover-2.zip.
"Alldocube Mix Plus" specs:
CPU m37y-30
HD615
1 micro-usb3 port with adapter
4gb ddr3l
m2 Sata foresee 128 gb
intel micros secure card
alc283
intel 3165 dual channel a/c combo wifi/bt
usb-c (not a usb port)
SVIO front and rear camera
FTSC1000 touchscreen
WCOM4002 pen
battery dual Intel SR 1 Real Battery
Thanks for your help.
I' trying to install High Sierra on my tablet but I cannot get the installer (error in the photo).
I disabled Vt-d, secure boot, fastboot and enabled csm (uefi only).
I tried to follow the guide of rehab but I'am stuck at the photo... I also used a clover folder from another user that has this tablet but I have the same outputs in verbose...
Sometimes the installer restart the tablet but most of the times it is stuck at the photo...
I use the unique micro-usb 3 port with the adapter and an external powered hub... I tried also to set the auto-boot of the installer from the bios and clover so that I have not to connect the keyboard to see if it boot and I have the same problem... So it is not the hub to cause it... I tried with 2 different Usb2 sticks and with an Usb3 stick... I tried also both OsxAptioFixDrv-64.efi+EmuVariableUefi.efi and AptioMemoryFix.efi... Tried also to faken the ig-platform-id with no luck...
In here there are the two zips and the photo on verbose... The zip built by me from the guide is Clover.zip, the zip of the other user is Clover-2.zip.
"Alldocube Mix Plus" specs:
CPU m37y-30
HD615
1 micro-usb3 port with adapter
4gb ddr3l
m2 Sata foresee 128 gb
intel micros secure card
alc283
intel 3165 dual channel a/c combo wifi/bt
usb-c (not a usb port)
SVIO front and rear camera
FTSC1000 touchscreen
WCOM4002 pen
battery dual Intel SR 1 Real Battery
Thanks for your help.