Contribute
Register

[solved] IdeaPad 700-15ISK Can't boot into OS X Installer

Status
Not open for further replies.
It should prepare the environment for the upcoming installation. I mean it.
 
soto2080 said:
It should prepare the environment for the upcoming installation. I mean it.
Click to expand...

The procedure is to partition as GPT with a single HFS+J volume. Then install to that HFS+J volume.
 
So it should have been partition again.
I am trying again with two partitions are partitioned in NVMe SSD and wating for result.
 
soto2080 said:
So it should have been partition again.
I am trying again with two partitions are partitioned in NVMe SSD and wating for result.
Click to expand...

Why two partitions? How is each formatted?

Maybe you forgot EmuVariableUefi-64.efi in drivers64UEFI?
 
I just wonna to sure it have been repartitioned. one is 30 and the other is 98.
I actually forgot EmuVariableUefi-64.efi because it's never been used in my desktop.
I should try it ASAP.
 
Oh!Mr.RehabMan,I need to thank you at first.
You are such a lifesaver!!
After I added EmuVariableUefi-64.efi,it work well now.
Now It's at the second steps of installation.
So it's inevitable that I will have some questions to consult you.

I will collect informations and problems during installation,post-installation and patching dsdt to make a guide if I can pass through all these challenges to make some contributions at least.
 
soto2080 said:
Oh!Mr.RehabMan,I need to thank you at first.
You are such a lifesaver!!
After I added EmuVariableUefi-64.efi,it work well now.
Now It's at the second steps of installation.
So it's inevitable that I will have some questions to consult you.

I will collect informations and problems during installation,post-installation and patching dsdt to make a guide if I can pass through all these challenges to make some contributions at least.
Click to expand...

Marking solved.
 
joalmoju said:
Mr. soto2080 can you please post your final config.plist and extra kexts? I have the same system but still can't reach the desktop.

EDIT: changing SMBIOS from 12.5 to 12.2 the boot process was ok...
Click to expand...
Here is my config.

i am trying to make it at least have basic functions.
Till now things works:
1.Battery percent(use kext from rehabman)
2.Native Power management
3.Backlight control (I use appleps2smarttouchpad)
4.USB ports
5.AppleHDA for mic and speaker by AppleALC
6.NVMe by kext from Rehabman
7.Camera
too much to list a
Don't work(I haven't found solutions)
1.Native Battery Status
2.HDMI Display and Audio
3.Card reader.
Things impossible to get it work till now:Intel AC-3165.

After I fix hdmi output and try to apply Rehabman's new guide I will post a feeding guide for this device.
 

Attachments

  • CLOVER.zip
    4.6 MB · Views: 299
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top