Contribute
Register

[SOLVED] How to get multi-channel on digital optical output ???

Status
Not open for further replies.
Joined
Sep 6, 2012
Messages
25
Motherboard
Gigabyte Z77X-UDH5 WiFi-f16j
CPU
i5-3570K
Graphics
RX 580
Hi, mates ! Trying to watch BD`s on my HT, but can`t get 5.1 audio from digital optical output. The system is on sig below.

Thank you !

Oh, running ML 10.8.2, installed from Unibeast, drivers from Multibeast.
 
How to get multi-channel on digital optical output ???

So, it's a NO GO ??? Or I missed something ?
 
How to get multi-channel on digital optical output ???

So, it's a NO GO ??? Or I missed something ?
No information!!!!!!!! No help. What is your source? What is your player? What is it connected to?
 
How to get multi-channel on digital optical output ???

I'm trying to play a commercial Blu-ray on my BH10LS30 internal BD-RW with MacGo MAC Blu-ray Player through GA-Z77X-UDH5 SPDIF optical output to my 5.1 receiver. All I got is 2 channel audio, not 5.1 or 7.1 disk tracks.

Thank you !
 
How to get multi-channel on digital optical output ???

I'm trying to play a commercial Blu-ray on my BH10LS30 internal BD-RW with MacGo MAC Blu-ray Player through GA-Z77X-UDH5 SPDIF optical output to my 5.1 receiver. All I got is 2 channel audio, not 5.1 or 7.1 disk tracks.
Contact MacGo. There is nothing wrong with your system.
 
How to get multi-channel on digital optical output ???

Toleda, you're right: nothing wrong. The secret is to use a player that handles "pass through" digital signal. MPlayerX and DVDF abMedia Player do !!!! Now I can watch movies in DTS or DD 5.1 and 7.1.
Thread may be closed.
Cheers !
 
Status
Not open for further replies.
Back
Top