[Solved] High Sierra installation: reboots and can't finish to install.

[maldimeriggio]

Hello everybody!
I'm new on tonymacx86 and first of all i want to congratulate because i've Always gave an eye on hackintosh world and found this forum as the best place to get info and support.

So, i'm trying to build my first hackintosh, and after creating a bootable USB with UniBeast and starting to install High Sierra, my PC reboots after some minutes from the installation start. After the reboot, when i get into the boot selection and select the UniBeast USB, i get an error from Mac OS Installation telling me it couldn't be possible to install High Sierra: "An error occurred while loading the installer resources".

Any ideas? I tried to search on forum, but since i'm kinda new to hackintosh i found so many possibilities i don't know where to start from..
Verbose mode's result down.
Thanks in advance

Trying to install on:
-i5 4670k
-AsRock Z87 Extreme4
-GTX 1060 3GB
-4GB DDR3 1600

I followed this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/

And set up my BIOS as described in this other one: https://www.tonymacx86.com/threads/success-asrock-z87-extreme-4-core-i7-4770k-r9-290x.160959/

 

[maldimeriggio]

"""SOLVED""" installing Sierra instead of High Sierra. I'll manage to update from Sierra, which installation went very smooth.
I suspect the problem had to do with partial installer of High Sierra "converted" to the full installer using this guide: https://www.tonymacx86.com/threads/...cted-mac-os-x-installer-is-incomplete.249330/

 

[Arzamar]

Oh, I was having the same problem. Good to know, gonna try with Sierra now.

 

[Arzamar]

Yeah, "the converted method" caused problems. It's fine now after I tried installing with another drive.