Contribute
Register

[Solved] High Sierra 10.13.4 USB 3.0 problems

Status
Not open for further replies.
You could save this replay until you get home :)
 
Solved for 10.13.6 updates!
  1. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  2. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  3. Save config.plist

Solved issue of losing USB after upgrade to 10.13.6 on Z170X-UD5 TH
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist

Worked for me thank you very much.
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
Hey buddy I used this patch and It worked .. but now the problem is my mobo USB 3.0 ports are working fine but my front panel usb3.0 port is not working ... can you help me with that ?? I am using 10.13.6
 
This worked for me on a MSI Z-370-A-PRO Motherboard

THANKS !

Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
Hi! And thanks for the post! I applied this patch as per instructions and it worked perfectly for me, too. Awesome!
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
That fixed my new build, Thanks
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist

PERFECTO - THANK YOU VERY MUCH
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist

Oh yes!! Thank you.
 
Status
Not open for further replies.
Back
Top