Contribute
Register

[Solved] High Sierra 10.13.4 USB 3.0 problems

Status
Not open for further replies.
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
LIFESAVER!!!!
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist

Thank you, worked like a charm
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
Thanks for this comprehensive solution. Works perfectly!
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist

Hi there i really need this done. I downloaded clover configurator and i mounted EFI but when i go to the EFI folder there is no CLOVER FOLDER. I'm really stuck and i cannot use my usb ports with the 10.13.6 update. Could you show me how to get that clover folder and the rest i can do
 
How did you get the CLOVER folder to show up in the EFI folder? I mounted my EFI but it only has an APPLE folder and not a CLOVER folder in it...
It appears you are mounting the wrong Efi partition. When you open Clover Configurator, navigate through the list of Efi partitions and mount the Efi partition that is on the USB "Install macOS ........" flash drive.
 
How did you get the CLOVER folder to show up in the EFI folder? I mounted my EFI but it only has an APPLE folder and not a CLOVER folder in it...
One other note. I recall when trying to use my USB 3.0 port, my "Install macOS High Sierra" Flash Drive was not mounting. I had to use a USB 2 port to mount the Flash Drive.
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
Thanks for this!
 
Solved for 10.13.6 updates!

Download the latest Clover Configurator Global version 5.1.3.1 and apply the patch below.

https://mackie100projects.altervista.org/download-clover-configurator/

Hackintosh 10.13.6 USB Patch
High Sierra 10.13.6 requires a new USB patch to get all USB/USB3 ports recognized and working. You will also need the USBInjectAll.kext

  1. Mount EFI Partition with Clover Configurator
  2. Navigate to /Volumes/EFI/EFI/Clover/
  3. Right-click open config.plist with Clover Configurator
  4. Click Kernel and Kext Patches under SECTIONS of Clover Configurator
  5. Click the “+” button near the bottom to add this patch:
    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [HEX]: 837D880F 0F83A704 0000
    • Replace* [HEX]: 837D880F 90909090 9090
    • Comment: USB 10.13.6+ by PMHeart
    • MatchOS: 10.13.x
  6. Save config.plist
Hi, unfortunately doesn't work for my build :(
 
Status
Not open for further replies.
Back
Top