- Joined
- Dec 3, 2011
- Messages
- 438
- Motherboard
- HP Elite X2
- CPU
- i5-7600U
- Graphics
- HD 620, 2736x1834
- Mac
- Classic Mac
- Mobile Phone
It's in a very usable state, but if I can get the above issues sorted out, then it will be perfect for me as I couldn't care less if the card reader works. I tried the Elan kexts for the trackpad but the cursor would go crazy periodically so I'm just going to stick with it in mouse mode via VoodooPS2. Anyway, on to the issues:
Audio - I have installed an (allegedly) patched AppleHDA and set the layout to 3 with Clover's config. The internal speakers show up, but do not produce any sound. The internal microphone and microphone jack do work as expected. Additionally, the headphones work as expected and switch automatically. I have not been able to test HDMI audio output yet. I have tried changing the layout to no effect, but I'm just fumbling around in the dark. I have no trouble following guides but I don't pretend to know what I'm doing.
Brightness - No brightness slider appears in the display preference pane. I suspect that my display is eDP based and it's my understanding that patching will not help in that case. I have the 1080p FHD IPS display, not the 3K one. The reason I suspect eDP (other than the patches not working) is that when I look up the replacement part, the panel has a 30-pin connector. An LED LVDS panel would normally have a 40-pin interface. I base that on some panel research I've done when building xbox laptops so I *may* be wrong, but I don't think so.
Sleep - I've tried some of the various patches floating around, but like the audio, I'm just blindly experimenting hoping that I hit the mark somewhere. It will go to sleep, but it takes a good 20 seconds or so for it to finally do it. Then it seems to immediately sort of half wake up, but the screen never comes back on.
I'm attaching my Clover folder which contains the original DSDT files and my patched ones along with IOReg. On this particular set of DSDT/SSDTs, I've applied following - Parsop_zero fix, ADBG fix, remove DSM, SMBUS, OS Check Fix, add IMEI, RTC Fix, GTX0 to IGPU, B0D3 to HDAU, Battery patch, and Discrete Graphics card disable. I recreated the list from memory (I know, I should have kept track), so it's possible that something else is applied.
If anybody can point me in the right direction on any of these, I'd appreciate it!
Audio - I have installed an (allegedly) patched AppleHDA and set the layout to 3 with Clover's config. The internal speakers show up, but do not produce any sound. The internal microphone and microphone jack do work as expected. Additionally, the headphones work as expected and switch automatically. I have not been able to test HDMI audio output yet. I have tried changing the layout to no effect, but I'm just fumbling around in the dark. I have no trouble following guides but I don't pretend to know what I'm doing.
Brightness - No brightness slider appears in the display preference pane. I suspect that my display is eDP based and it's my understanding that patching will not help in that case. I have the 1080p FHD IPS display, not the 3K one. The reason I suspect eDP (other than the patches not working) is that when I look up the replacement part, the panel has a 30-pin connector. An LED LVDS panel would normally have a 40-pin interface. I base that on some panel research I've done when building xbox laptops so I *may* be wrong, but I don't think so.
Sleep - I've tried some of the various patches floating around, but like the audio, I'm just blindly experimenting hoping that I hit the mark somewhere. It will go to sleep, but it takes a good 20 seconds or so for it to finally do it. Then it seems to immediately sort of half wake up, but the screen never comes back on.
I'm attaching my Clover folder which contains the original DSDT files and my patched ones along with IOReg. On this particular set of DSDT/SSDTs, I've applied following - Parsop_zero fix, ADBG fix, remove DSM, SMBUS, OS Check Fix, add IMEI, RTC Fix, GTX0 to IGPU, B0D3 to HDAU, Battery patch, and Discrete Graphics card disable. I recreated the list from memory (I know, I should have kept track), so it's possible that something else is applied.
If anybody can point me in the right direction on any of these, I'd appreciate it!