[SOLVED] GA-H110M-S2H Problems with El Capitan

[snakePanda]

Hello,

I'm trying to install OS X El Capitan on H110-S2H, Skylake i5-6400 and 16 GB DDR4 RAM.

I have used Unibeast 6.2.0 and El Capitan 10.11.6 and everytime I try to boot the pendrive I get this screen: (see attachment).
I'm only able to boot in safe mode.
I'm using HDMI and USBs 2.0.

Any ideas?

Thanks.

 

[P1LGRIM]

Any ideas?

Yes, disable your Serial port (SuperIO) in BIOS settings.

 

[snakePanda]

Yes, disable your Serial port (SuperIO) in BIOS settings.

THANK YOU SO MUCH.

It works properly.

 

[Reetu]

Hello

need h110m-s2 uefi setting please. for El Capitan.

 

[Reetu]

Hello,

I'm also trying to install OS X El Capitan on H110-S2, i5-6400 and 16 GB DDR4 RAM.

can you share the bios setting?

 

[BreBo]

Hello,

I'm also trying to install OS X El Capitan on H110-S2, i5-6400 and 16 GB DDR4 RAM.

can you share the bios setting?

BIOS Settings are described in the 10.11.4+ Skylake Starter Guide

 

[Reetu]

Thank you. Let me try

 

[snakePanda]

Thank you. Let me try

Use these BIOS Settings and Unibeast to make the bootable USB. Then, with Multibeast, install Intel HD 530 Graphics and make the modification to install audio in 100 series motherboards. After this, you have to use toleda audio command and use ID 2.

H110M-S2H it's fully functional.

 

[rajibsecond]

Hi guys

I have also almost same system config
Skylake I3 6100
Gigabyte h110m-s2
8gb ddr4 2133mhz kingstone hyperx fury ram
Kingstone ssdnow v300 120gb ssd
2*1tb seagate hdd
Zotac nvidia gtx 960 2gb
Pc case circle cc821
Psu corsair vs550

I have dual booted with windows 10 & mac os sierra by clover bootloader.just 1 issue i am facing wright now is that sometimes my audio is not working after turn on my pc.i need to restart my pc then it is working.some times i need to restart 3-4 times to get it work.

If anybody have sollution then please post it.it will be very helpful for me.

Thanks.

 

[wo.dev]

Hi,

I'm not able to config my BIOS setting for installing El Capitan . anybody please help me.

Here my PC information:

1. M/B : Gigabyte H110M-s2.
2. RAM : 8Gb DDR4.
3. Processor : Intel(R) Core(TM) i5 6th Generation.
4. UniBeast 6.2.0 for create bootable pendrive.

I have tried all about setup with bios. After that my pen-drive is boot and when I select "External (Boot Mac OS X from Untitled)" there is nothing to do only blank screen visible. After that PC shut down.

Please help me.