- Joined
- May 15, 2011
- Messages
- 233
- Motherboard
- ASrock z370 Fatal1ty Gaming mini-ITX/ac
- CPU
- i7 8700K
- Graphics
- UHD630/GTX 1070
- Mac
- Mobile Phone
I finally managed to put my build together. I crammed everything into a Node 202. Damn it was hard, but worh it. Looks so pretty now. It booted my old Sierra SDD just fine. I had put the required kexts in the EFI folder prior to building the PC.
Sound worked out of the box. Graphics come up on screen, but they are a bit buggy. I'm using only the integrated HD630 graphics at the moment.
What I need to get fixed is the HDMI (graphics and audio) for the Intel HD630 and USB. For some reason some USB devices do not show up. USB thumb drives and external USB-SATA dock for example.
I'm not quite sure what to do. I've tried the 200-series port limit fix, but that didn't work. Does it only work for 200-series boards? For graphics I tried to install all the suggested kexts and patches. They don't seem to work either.
Edit: Got USB port limit fixed with an SSDT patch.
Got graphics kinda fixed with graphics settings via Clover configurator. They can still be buggy but at least I get video via HDMI and Display port now. HDMI audio still didn't work.
I tried to install Hardware monitor with FakeSMC kexts, but it bricked my system. Or maybe it was the enable HDMI audio option in Clover configurator settings. Either way that sucked balls. Now I somehow managed to boot to my system again with High Sierra installer USB.
Edit2: I had to reinstall the whole thing. This time I installed High Sierra 10.13.2. Install went fine, but I can't boot the OS without safe mode.
Sound worked out of the box. Graphics come up on screen, but they are a bit buggy. I'm using only the integrated HD630 graphics at the moment.
What I need to get fixed is the HDMI (graphics and audio) for the Intel HD630 and USB. For some reason some USB devices do not show up. USB thumb drives and external USB-SATA dock for example.
I'm not quite sure what to do. I've tried the 200-series port limit fix, but that didn't work. Does it only work for 200-series boards? For graphics I tried to install all the suggested kexts and patches. They don't seem to work either.
Edit: Got USB port limit fixed with an SSDT patch.
Got graphics kinda fixed with graphics settings via Clover configurator. They can still be buggy but at least I get video via HDMI and Display port now. HDMI audio still didn't work.
I tried to install Hardware monitor with FakeSMC kexts, but it bricked my system. Or maybe it was the enable HDMI audio option in Clover configurator settings. Either way that sucked balls. Now I somehow managed to boot to my system again with High Sierra installer USB.
Edit2: I had to reinstall the whole thing. This time I installed High Sierra 10.13.2. Install went fine, but I can't boot the OS without safe mode.
Last edited: