Contribute
Register

[solved] Cant boot system after post-installation

Status
Not open for further replies.
Done, but im not sure, should i put "ACPI/SSDT/DropOem=true" in config.plist for clover for sure?
 
bladzik said:
Done, but im not sure, should i put "ACPI/SSDT/DropOem=true" in config.plist for clover for sure?
Click to expand...

It is covered in detail in the guide, but the rule is quite simple: If you have patched SSDTs in ACPI/patched, DropOem=true is required.
 
Ok, do You think that its ok?

<key>SortedOrder</key>
<array>
<string>SSDT.aml</string>
<string>SSDT-0.aml</string>
<string>SSDT-1.aml</string>
<string>SSDT-2.aml</string>
<string>SSDT-3.aml</string>
<string>SSDT-7.aml</string>
<string>SSDT-8.aml</string>
<string>SSDT-9.aml</string>
<string>SSDT-10.aml</string>
<string>SSDT-11.aml</string>
<string>SSDT-12.aml</string>
<string>SSDT-13.aml</string>
</array>

Original is:

<key>SortedOrder</key>
<array>
<string>SSDT.aml</string>
<string>SSDT-0.aml</string>
<string>SSDT-1.aml</string>
<string>SSDT-2.aml</string>
<string>SSDT-3.aml</string>
<string>SSDT-4.aml</string>
<string>SSDT-5.aml</string>
<string>SSDT-6.aml</string>
<string>SSDT-7.aml</string>
<string>SSDT-8.aml</string>
<string>SSDT-9.aml</string>
<string>SSDT-10.aml</string>
<string>SSDT-11.aml</string>
<string>SSDT-12.aml</string>
<string>SSDT-13.aml</string>
<string>SSDT-14.aml</string>
<string>SSDT-15.aml</string>
<string>SSDT-16.aml</string>
<string>SSDT-17.aml</string>
<string>SSDT-18.aml</string>
<string>SSDT-19.aml</string>
<string>SSDT-XOSI.aml</string>
<string>SSDT-LPC.aml</string>
</array>
 
bladzik said:
Ok, do You think that its ok?

<key>SortedOrder</key>
<array>
<string>SSDT.aml</string>
<string>SSDT-0.aml</string>
<string>SSDT-1.aml</string>
<string>SSDT-2.aml</string>
<string>SSDT-3.aml</string>
<string>SSDT-7.aml</string>
<string>SSDT-8.aml</string>
<string>SSDT-9.aml</string>
<string>SSDT-10.aml</string>
<string>SSDT-11.aml</string>
<string>SSDT-12.aml</string>
<string>SSDT-13.aml</string>
</array>

Original is:

<key>SortedOrder</key>
<array>
<string>SSDT.aml</string>
<string>SSDT-0.aml</string>
<string>SSDT-1.aml</string>
<string>SSDT-2.aml</string>
<string>SSDT-3.aml</string>
<string>SSDT-4.aml</string>
<string>SSDT-5.aml</string>
<string>SSDT-6.aml</string>
<string>SSDT-7.aml</string>
<string>SSDT-8.aml</string>
<string>SSDT-9.aml</string>
<string>SSDT-10.aml</string>
<string>SSDT-11.aml</string>
<string>SSDT-12.aml</string>
<string>SSDT-13.aml</string>
<string>SSDT-14.aml</string>
<string>SSDT-15.aml</string>
<string>SSDT-16.aml</string>
<string>SSDT-17.aml</string>
<string>SSDT-18.aml</string>
<string>SSDT-19.aml</string>
<string>SSDT-XOSI.aml</string>
<string>SSDT-LPC.aml</string>
</array>
Click to expand...

Extra non-existing files in the SortedOrder list have no effect. Removing entries where there is no corresponding file is only an optimization.
 
Ok, battery is actually working. Now im about to fix no sound problem. Ill post in this thread about audio errors if thats not a problem :)
 
bladzik said:
Ok, battery is actually working. Now im about to fix no sound problem. Ill post in this thread about audio errors if thats not a problem :)
Click to expand...

I think this thread should be marked as solved. The content no longer matches the title.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top