- Joined
- Jan 19, 2013
- Messages
- 3
- Motherboard
- Asus Zenbook UX303FA-FB186H
- CPU
- M-5Y10c
- Graphics
- Intel HD 5300
- Mac
- Classic Mac
- Mobile Phone
Hi @all,
i'am the unlucky one at this time.
I bought an Asus UX305FA with QHD+ IPS Display. I got nearly everything working expect the Display.
The UX305FA has an Core M-5Y10c Prozessor with Intel HD 5300, 8GB RAM
The Display Resolution is 3200x1800 Pixel
My BIOS VRAM ist set to 128MB
For SMBIOS i tried MacBook Pro 11,2 and MacBook Air 6,2
I injected "ag-platform-id" -> 0x161e0001 in clover und got the kext for HD5300 loaded, but with the black screen. If I don't inject Intel it works without QE/CI with no kext loaded. I activated screensharing, made a reboot with inject intel and accessed it by vnc. So it was possible to check if kext for Graphics is loaded and which display is detected. Framebuffer Driver is loaded.
With SMBIOS MacBook Pro 11,2 a 12" Retina Display was detected.
With SMBIOS MacBook Air 6,2 a 13" non Retina Display was detected
So finally everything seems to work perfect except the Display.
I also tried to inject EDID that i've extracted from Linux with get-edid, without success.
The Display remains black.
At this point I need your Help. I don't know what i can do. I can't find a Post with an Solution after hours looking around.
thanks in advance
Markus
i'am the unlucky one at this time.
I bought an Asus UX305FA with QHD+ IPS Display. I got nearly everything working expect the Display.
The UX305FA has an Core M-5Y10c Prozessor with Intel HD 5300, 8GB RAM
The Display Resolution is 3200x1800 Pixel
My BIOS VRAM ist set to 128MB
For SMBIOS i tried MacBook Pro 11,2 and MacBook Air 6,2
I injected "ag-platform-id" -> 0x161e0001 in clover und got the kext for HD5300 loaded, but with the black screen. If I don't inject Intel it works without QE/CI with no kext loaded. I activated screensharing, made a reboot with inject intel and accessed it by vnc. So it was possible to check if kext for Graphics is loaded and which display is detected. Framebuffer Driver is loaded.
With SMBIOS MacBook Pro 11,2 a 12" Retina Display was detected.
With SMBIOS MacBook Air 6,2 a 13" non Retina Display was detected
So finally everything seems to work perfect except the Display.
I also tried to inject EDID that i've extracted from Linux with get-edid, without success.
The Display remains black.
At this point I need your Help. I don't know what i can do. I can't find a Post with an Solution after hours looking around.
thanks in advance
Markus