[solved] Asus UX430UA - fingerprint, trackpad, Touch ID

[gulios]

If SS04 is your USB-C and it is the same regardless of USB-C cable orientation, then it is a USB-C with switch, and therefore should be UsbConnector=9.
And any HSxx port that is associated with that port should also be UsbConnector=9.

ok, i changed UsbConnector=9 for SS04 and HS04

IOREG in attachment

 

[RehabMan]

ok, i changed UsbConnector=9 for SS04 and HS04

IOREG in attachment

Based on what I understand about your xHCI topology, it looks correct.

 

[gulios]

H

Based on what I understand about your xHCI topology, it looks correct.

so last question @RehabMan and you can mark it as SOLVED

Why in real MacBookPro(2016) System Profiler shows(Real-MacBookPro.png) USB 2.0, USB 3.0 etc and hackintosh(Asus-Hack.png) shows only USB 3.0 Bus?

All ports work fine so why they are not display in SystemProfiler?

It;s not an issue, just a question because i don;t get it


anyway, thank you for your time !!!

 

[RehabMan]

Why in real MacBookPro(2016) System Profiler shows(Real-MacBookPro.png) USB 2.0, USB 3.0 etc and hackintosh(Asus-Hack.png) shows only USB 3.0 Bus?

The MacBookPro you're looking at has an EHCI controller (attached).
According to here: https://pci-ids.ucw.cz/read/PC/12d8
The EHCI controller connected to it is from "Pericom Semiconductor", and is "PI7C9X442SL USB EHCI Controller".
Seems likely it is connected via Thunderbolt.

Skylake has no EHCI controller, only xHCI and, unlike the MacBookPro, you haven't connected any external EHCI controller.

All ports work fine so why they are not display in SystemProfiler?

Ports do not appear in System Information->USB. Only connected USB devices.

 

[gulios]

The MacBookPro you're looking at has an EHCI controller (attached).
According to here: https://pci-ids.ucw.cz/read/PC/12d8
The EHCI controller connected to it is from "Pericom Semiconductor", and is "PI7C9X442SL USB EHCI Controller".
Seems likely it is connected via Thunderbolt.

Skylake has no EHCI controller, only xHCI and, unlike the MacBookPro, you haven't connected any external EHCI controller.



Ports do not appear in System Information->USB. Only connected USB devices.

wow, you're right. I realized that when i was doing screenshot i was connected to AppleDisplay via Thunderbolt...

so, i think we can mark it as SOLVED


Thx !!!

 

[RehabMan]

Marked solved.