[Solved] ANY HELP - CLEAN INSTALL HS10.13.2 (Shutdown & Audio/display port problems)

[pbrandao]

Hello all -
I'm running High Sierra 10.13.2 on my Hackintosh, and pretty much everything is working ok, flawlessly except sleep. Here's

My first installation was HS10.13.0, and everything was almost perfect (no WIFI).
I can´t upgrade, so decide to try a fresh and clean install. I have done the same and exact process o the tony guide
"UniBeast: Install macOS High Sierra on Any Supported Intel-based PC"
after x6 attempts, I finally install and make 2 ccc clones of the basic system (with BT on but...

EXCEPT:
- shutdown (help, or link with help) I only need to shutdown
- Audio (in HS10.13.1 i was listened audio thru 2nd monitor-LG38UC99-W connected by display port / now on HS 10.13.2 monitor is ok, but not sound (only if i use monitor with bluetotth output)
- WI-FI (is hard to install, so I use ethernet/cable)

.....
I notice in my old sys HS10.13.1 (i see display port) can`t remember the drive install on multibeast 10.0 or it was installed by Nvidia webdrive)
Audio: Devices:
DisplayPort:

Default Output Device: Yes
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 48000
Transport: DisplayPort
Output Source: LG ULTRAWIDE
.....

BUT NOW I CANT SEE IT HS10.13.2 fresh install ( i think i have display port when update from 10.13.0 to10.13.1 with new Nvidia drive install, not sure)

this is my current settings on multibeast 10.2 pdf attachment (red, is not installed this time)


My ASK for help if it is possible (i read almost guides and problems from others users. I'm not expert on this and not sure about the best method for my hardware, because first time everything was good, so what changed?


Thanks in advance and sorry for my English
keep excellent work guys! without you I never do it!
PB

 

[pbrandao]

NOT FIX
so,
I HAVE TO DO A CLEAN INSTALL AGAIN
now working.