[solved] 99% Working Yosemite. Still can't manage to path battery on DSDT

[otosan]

Hi All,

so i manage to install an almost perfectly working Yosemite 10.10.5 on my Alienware 17 with this spec :

i7 4700 QM
16 GB DDR 3 1600 Mhz
GTX 770M - 3GB
2 SSD + 2HDD

My installation step is using Unibeast to create Clover based installation disk using "Yosemite Install App" from App Store.

Everything went fine. Boot the installation with -v npci=0x2000 and dart=0

Nvidia Graphic went native directly since my latest BIOS give an option to disable IGPU

CPU power management work directly as well.

as for post installation. I only copy PS2, FakeSMC, Blueetoth, and Wireless Kext to my Clover EFI Folder.

For sound, i'm using VoodooHDA and working well. The button also work to adjust the volume.

i also patch the DSDT to get the brightness adjusment work

One last thing that i still can't manage to get work is the Battery. (am already using ACPIBAtteryManager.kext) --> Which surprisingly working out of the box with 10.9.5, but not with Yosemite

Could you please help to take a look into the DSDT and help me to patch it ?

Thank You very much!

Attached is my DSDT -> Post Brightness fix patched

 

[RehabMan]

[Need Help] 99% Working Yosemite. Still can't manage to path battery on DSDT

Could you please help to take a look into the DSDT and help me to patch it ?

http://www.tonymacx86.com/yosemite-laptop-support/175789-guide-patching-laptop-dsdt-ssdts.html

 

[otosan]

[Need Help] 99% Working Yosemite. Still can't manage to path battery on DSDT

http://www.tonymacx86.com/yosemite-laptop-support/175789-guide-patching-laptop-dsdt-ssdts.html

Thank You,

Got it fully working now!

 

[RehabMan]

[Need Help] 99% Working Yosemite. Still can't manage to path battery on DSDT

Thank You,

Got it fully working now!

Marked solved.

 

[otosan]

Marked solved.

Sorry, was jumped too fast.

So, it actually working, the battery status. But the capacity is incorrect,

somehow it only detect my battery as a 523 mAH meanwhile it was supposed to be 7,166 mAH (86 wH) - causing the percentage drop down so fast and say that i got low battery.

any idea what might cause it ?

 

[RehabMan]

Sorry, was jumped too fast.

So, it actually working, the battery status. But the capacity is incorrect,

somehow it only detect my battery as a 523 mAH meanwhile it was supposed to be 7,166 mAH (86 wH) - causing the percentage drop down so fast and say that i got low battery.

any idea what might cause it ?

It means you patched your DSDT incorrectly. Double check your work, per guide. If you need help, read guide section "Problem Reporting".